ACPL-P456-560E Datasheet, PDF (1/12 Pages) AVAGO TECHNOLOGIES LIMITED – ACPL-P456 and ACPL-W456 Intelligent Power Module and Gate Drive Interface Optocouplers

ACPL-P456 and ACPL-W456
Intelligent Power Module and Gate Drive Interface Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The ACPL-P456 and ACPL-W456 contain a GaAsP LED
optically coupled to an integrated high gain photo
detector. Minimized propagation delay difference
between devices make these optocouplers excellent
solutions for improving inverter efficiency through
reduced switching dead time. Specifications and perfor-
mance plots are given for typical IPM applications.
Functional Diagram
ANODE 1
6 V_CC
N.C. 2
5 V_O
CATHODE 3
SHIELD
4 Ground
Note: A 0.1 μF bypass capacitor must be connected between pins 4 and 6.
Truth Table
LED
V_O
ON
LOW
OFF
HIGH
Features
x Performance Specified for Common IPM Applications
Over Industrial Temperature Range.
x Short Maximum Propagation Delays
x Minimized Pulse Width Distortion (PWD)
x Very High Common Mode Rejection (CMR)
x High CTR.
x Available in Stretched SO-6 package with 8 mm
creepage and clearance.
x Safety Approval:
UL Recognized with 3750 V_rms for 1 minute (5000
Vrms for 1 minute for ACPL-W456 devices) per
UL1577.
CSA Approved.
IEC/EN/DIN EN 60747-5-5 Approved with V_IORM =
1140 Vpeak (ACPL-W456) and V_IORM = 891 Vpeak
(ACPL-P456) for Option 060.
Specifications
x Wide operating temperature range: –40°C to 100°C.
x Maximum propagation delay t_PHL = 400 ns, t_PLH = 490 ns
x Maximum Pulse Width Distortion (PWD) = 450 ns.
x 15 kV/μs minimum common mode rejection (CMR) at
V_CM = 1500 V.
x CTR > 44% at I_F = 10 mA
Applications
x IPM Isolation
x Isolated IGBT/MOSFET Gate Drive
x AC and Brushless DC Motor Drives
x Industrial Inverters
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.