ACPL-P340 Datasheet, PDF (1/19 Pages) AVAGO TECHNOLOGIES LIMITED – 1.0 Amp Output Current IGBT Gate Drive Optocoupler with Rail-to-Rail Output Voltage in Stretched SO6

ACPL-P340 and ACPL-W340
1.0 Amp Output Current IGBT Gate Drive Optocoupler
with Rail-to-Rail Output Voltage in Stretched SO6
Data Sheet
Description
The ACPL-P340/W340 contains an AlGaAs LED, which is
optically coupled to an integrated circuit with a power
output stage. This optocoupler is ideally suited for driving
power IGBTs and MOSFETs used in motor control inverter
applications. The high operating voltage range of the
output stage provides the drive voltages required by gate
controlled devices. The voltage and high peak output
current supplied by this optocoupler make it ideally suited
for direct driving IGBT with ratings up to 1200 V / 50 A. For
IGBTs with higher ratings, this optocoupler can be used to
drive a discrete power stage which drives the IGBT gate.
The ACPL-P340 and ACPL-W340 have the highest insula-
tion voltage of V_IORM = 891 V_peak and V_IORM = 1140 V_peak
respectively in the IEC/ EN/DIN EN 60747-5-2.
Functional Diagram
ANODE 1
NC 2
CATHODE 3
6 V_CC
5 V_OUT
4 ^VEE
Note: A 1 F bypass capacitor must be connected between pins V_CC and
V_EE.
Truth Table
V_CC – V_EE
V_CC – V_EE
“POSITIVE GOING” “NEGATIVE GOING”
LED (i.e., TURN-ON) (i.e., TURN-OFF)
V_O
OFF
0 – 30 V
0 – 30 V
LOW
ON
0 – 12.1 V
0 – 11.1 V
LOW
ON 12.1 – 13.5 V
11.1 – 12.4 V TRANSITION
ON
13.5 – 30 V
12.4 – 30 V
HIGH
Features
 1.0 A maximum peak output current
 0.8 A minimum peak output current
 Rail-to-rail output voltage
 200 ns maximum propagation delay
 100 ns maximum propagation delay difference
 LED current input with hysteresis
 35 kV/s minimum Common Mode Rejection (CMR) at
V_CM = 1500 V
 I_CC = 3.0 mA maximum supply current
 Under Voltage Lock-Out protection (UVLO) with
hysteresis
 Wide operating V_CC Range: 15 to 30 V
 Industrial temperature range: -40° C to 105° C
 Safety Approval:
– UL Recognized 3750/5000 V_RMS for 1 min.
– CSA
– IEC/EN/DIN EN 60747-5-2 V_IORM = 891/1140 V_peak
Applications
 IGBT/MOSFET gate drive
 AC and Brushless DC motor drives
 Renewable energy inverters
 Industrial inverters
 Switching power supplies
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.