ACPL-M60L-500E Datasheet, PDF (1/11 Pages) AVAGO TECHNOLOGIES LIMITED – Small Outline, 5 Leads, High CMR, High Speed, Description

ACPL-M60L
Small Outline, 5 Leads, High CMR, High Speed,
Logic Gate Optocouplers
Data Sheet
Description
The ACPL-M60L is an optically coupled gate that com-
bines a GaAsP light emitting diode and an integrated
high gain photo detector. The output of the detector
IC is an open collector Schottky-clamped transistor. The
internal shield provides a guaranteed common mode
transient immunity specification of 15 kV/µs at 3.3V op-
eration.
This unique design provides maximum AC and DC circuit
isolation while achieving LVTTL/LVCMOS compatibility.
The optocoupler AC and DC operational parameters are
guaranteed from –40˚C to +85˚C, allowing trouble-free
system performance.
These optocouplers are suitable for high speed logic
interfacing, input/output buffering, as line receivers in
environments that conventional line receivers cannot
tolerate and are recommended for use in extremely high
ground or induced noise environments.
Functional Diagram
ANODE 1
CATHODE 3
6 V_CC
5 V_O
4 GND
Features
• Dual Voltage Operation (3.3V/5V)
• Low power consumption
• 15 kV/µs minimum Common Mode Rejection (CMR)
at V_CM = 1000 V (3.3V operating voltage)
• High speed: 15 MBd typical
• LVTTL/LVCMOS compatible
• Low input current capability: 5 mA
• Guaranteed AC and DC performance over tempera-
ture: –40˚C to +85˚C
• Safety approvals; UL, CSA, IEC/EN/DIN EN 60747-5-2
• Surface mountable
• Very small, low profile JEDEC Registered package
outline
Applications
• Isolated line receiver
• Computer-peripheral interfaces
• Microprocessor system interfaces
• Digital isolation for A/D, D/A conversion
• Switching power supply
• Instrument input/output isolation
• Ground loop elimination
• Pulse transformer replacement
• Field buses
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.