|
ACPL-M60L-000E Datasheet, PDF (1/11 Pages) AVAGO TECHNOLOGIES LIMITED – Small Outline, 5 Leads, High CMR, High Speed, Logic Gate Optocouplers | |||
|
ACPL-M60L
Small Outline, 5 Leads, High CMR, High Speed,
Logic Gate Optocouplers
Data Sheet
Description
The ACPL-M60L is an optically coupled gate that com-
bines a GaAsP light emitting diode and an integrated
high gain photo detector. The output of the detector
IC is an open collector Schottky-clamped transistor. The
internal shield provides a guaranteed common mode
transient immunity specification of 15 kV/µs at 3.3V op-
eration.
This unique design provides maximum AC and DC circuit
isolation while achieving LVTTL/LVCMOS compatibility.
The optocoupler AC and DC operational parameters are
guaranteed from â40ËC to +85ËC, allowing trouble-free
system performance.
These optocouplers are suitable for high speed logic
interfacing, input/output buffering, as line receivers in
environments that conventional line receivers cannot
tolerate and are recommended for use in extremely high
ground or induced noise environments.
Functional Diagram
ANODE 1
CATHODE 3
6 VCC
5 VO
4 GND
Features
⢠Dual Voltage Operation (3.3V/5V)
⢠Low power consumption
⢠15 kV/µs minimum Common Mode Rejection (CMR)
at VCM = 1000 V (3.3V operating voltage)
⢠High speed: 15 MBd typical
⢠LVTTL/LVCMOS compatible
⢠Low input current capability: 5 mA
⢠Guaranteed AC and DC performance over tempera-
ture: â40ËC to +85ËC
⢠Safety approvals; UL, CSA, IEC/EN/DIN EN 60747-5-2
⢠Surface mountable
⢠Very small, low profile JEDEC Registered package
outline
Applications
⢠Isolated line receiver
⢠Computer-peripheral interfaces
⢠Microprocessor system interfaces
⢠Digital isolation for A/D, D/A conversion
⢠Switching power supply
⢠Instrument input/output isolation
⢠Ground loop elimination
⢠Pulse transformer replacement
⢠Field buses
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
|
▷ |