ACPL-M51L Datasheet, PDF (1/12 Pages) AVAGO TECHNOLOGIES LIMITED – Communications Interface

ACPL-M51L
1MBd Low Supply Voltage Digital Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The ACPL-M51L (single-channel in SO-5 footprint), is low
power, low supply voltage 1MBd digital optocoupler, con-
figurable as a 4pin device.
This digital optocoupler use an insulating layer between
the light emitting diode and an integrated photon detec-
tor to provide electrical insulation between input and out-
put.
ACPL-M51L has an increased common mode transient im-
munity of 15kV/µs minimum at V_CM = 1500V.
The current transfer ratio (CTR) is 140% typical for ACPL-
M51L at I_F = 3.0mA. This digital optocoupler can be use in
any TTL/CMOS, TTL/LSTTL or analog applications.
Functional Diagram
Anode 1
Cathode 3
6 _VCC
5 VO
4 GND
Anode 1
Cathode 3
6
5
4 GND
VCC
Truth Table
LED Vo
ON LOW
OFF HIGH
Features
• Wide supply voltage V_CC: 2.25V to 24V
• Low Drive Current : 3.0mA
• Open-Collector Output
• TTL compatible (5-pin configuration)
• Compact SO-5 package
• 15 kV/μs High Common-Mode Rejection at V_CM =
1500 V
• Guaranteed performance within temperature range:
-40°C to +105°C
• Low Propagation Delay: 1μs max at 5V
(5pin configuration)
• Worldwide Safety Approval:
- UL1577 recognized, 3750Vrms/1min
- CSA Approval
- IEC/EN/DIN EN 60747-5-5 Approval for Reinforced
Insulation
Applications
• Communications Interface
• Digital Signal Isolation
• MCU Interface
• Feedback Elements in Switching Power Supplies
• Digital isolation for A/D, D/A conversion Digital field
A 0.1μF bypass capacitor must be connected between pins V_CC and GND.
4-pin configuration : Pins 5 and 6 are externally shorted
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this
component to prevent damage and/or degradation which may be induced by ESD. The components
featured in this datasheet are not to be used in military or aerospace applications or environments.