ACPL-M46U-000E Datasheet, PDF (1/13 Pages) AVAGO TECHNOLOGIES LIMITED – Fast maximum propagation delays

ACPL-M46U-000E
Wide Operating Temperature Intelligent Power Module Optocoupler
with R²Coupler™ Isolation and 5 Lead Small Outline
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The ACPL-M46U-000E consists of a AlGaAs optically
coupled to an integrated high gain photo detector. Mini-
mized propagation delay difference between devices
makes these optocouplers excellent solutions for im-
proving industrial inverter efficiency through reduced
switching dead time.
Specification and performance plots are given for typical
IPM applications.
Avago R²Coupler isolation products provide the rein-
forced insulation and reliability needed for critical in
automotive and high temperature industrial applications.
Functional Diagram
ANODE 1
6 V _CC
5 V _OUT
CATHODE 3
SHIELD
4 ^GND
Truth Table
LED
V_O
ON
L
OFF
H
The connection of a 0.1 µF bypass capacitor between pins 4 and 6 is
recommended.
Features
• Performance specified for common IPM applications
over industrial temperature range: -40°C to 125°C
• Fast maximum propagation delays
- t_PHL & t_PLH = 550 ns
• Minimized Pulse Width Distortion (PWD = 370 ns)
• Very high Common Mode Rejection (CMR):
15 kV/µs at V_CM = 1500 V
• CTR > 44% at I_F = 10 mA
• Safety approval
- UL recognized per UL1577 (file no. E55361)
3750 V_rms for 1 minute
- CSA Approved
- IEC/EN/DIN EN 60747-5-5
Applications
• Industrial Intelligent Power Module isolation for
battery management system and motor control
• Isolated IGBT/MOSFET gate drive
• AC and brushless dc motor drives
• Industrial inverters for power supplies and motor
controls
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.