English
Language : 

ACPL-C87B-000E Datasheet, PDF (1/22 Pages) AVAGO TECHNOLOGIES LIMITED – Precision Optically Isolated Voltage Sensor
AFCT-57V6NSZ
Small Form Factor Pluggable (SFP) LC Optical Transceiver
for 1.25GBd Ethernet at Extended Link Lengths (Up to 40km)
Data Sheet
Description
The AFCT-57V6NSZ transceiver is a specially customised
low-cost and hot-pluggable SFP MSA-compliant optical
interconnect module for Gigabit Ethernet applications at
transmission distances up to 40km [1, 2].
The AFCT-57V6NSZ implements the serial portion of the
physical layer, and supports the features shown below
The AFCT-57V6NSZ features differential serial I/O inter-
face lines that are AC-coupled signals. Avago’s design
of the long wavelength SFP module uses a 1550 nm
distributed feedback (DFB) laser diode (LD) and takes
advantage of an integrated preamplifier/photo-detector.
The AFCT-57V6NSZ also contains transmitter, receiver
and control electronics.
Singlemode optical fiber, with LC connectors, is rec-
ommended as the communication media. The AFCT-
57V6NSZ has a digital diagnostic monitoring (DDM)
function in accordance with SFF-8472 [3] which allows
monitoring operating temperature, supply voltage, laser
bias current, transmitter optical output power and opti-
cal received power in real time via a serial-ID interface.
On the following page, Table1 lists the general specifica-
tions for the AFCT-57V6NSZ SFP.
Figure 1 shows a simplified block diagram of the AFCT-
57V6NSZ electronics.
Related Products
• AFBR-5715Z family:
850 nm 1.25 GBd 3.3 V multimode SFP Gigabit Ether-
net transceivers with DMI
• AFCT-5715Z:
1.25 GBd Ethernet (1000Base-LX) SFP with DMI
Features
• Gigabit Ethernet transceiver
• RoHS Compliant
• IEEE 802.3z, 1000BASE-ZX
• Extended transmission distance up to 40 km
• Compliant with SFP Multi Source Agreement (MSA)
• Duplex-LC optical interface
• 1550 nm DFB-LD
• Serial ID
• Digital Diagnostic Monitoring interface
• Bail delatch for easy removal from cage
• Available in industrial temperature range
(-40 to +85°C)
• Immune to ESD, RF fields, and Vcc noise
• Designed for very low RF emissions
• Class 1 laser safety
• AC-coupled differential serial I/O interface
• Single +3.3 Volt supply operation
• Low power dissipation
Applications
• Ethernet switches
• Multi-service switches and routers
• Broadband aggregation and wireless infrastructure
• Switched backplane applications
• High Speed Interface for server farms
• Metro access switch GbE connections