ACPL-5730L Datasheet, PDF (1/11 Pages) AVAGO TECHNOLOGIES LIMITED – Hermetically Sealed 3.3V, Low IF, Wide VCC, High Gain Optocouplers

ACPL-570XL, ACPL-573XL, ACPL-177XL, 5962-08227
Hermetically Sealed 3.3V, Low I_F, Wide V_CC, High Gain Optocouplers
Data Sheet
Description
These devices are single, dual, and quad channel, hermeti-
cally sealed optocouplers. The products are capable of
operation and storage over the full military temperature
range and can be purchased as either standard product
or with full MIL-PRF-38534 Class Level H or K testing or
from DLA Drawing 5962-08227. All devices are manufac-
tured and tested on a MIL-PRF-38534 certified line and are
included in the DLA Qualified Products Database Supple-
mental Information Sheets QPDSIS-38534 as Hybrid Mi-
crocircuits.
Each channel contains a GaAsP light emitting diode which
is optically coupled to an integrated high gain photon
detector. The high gain output stage features an open
collector output providing both lower saturation voltage
and higher signaling speed than possible with conven-
tional photo-Darlington optocouplers.
The supply voltage can be operated as low as 3.0 V without
adversely affecting the parametric performance.
These devices have a 300% minimum CTR at an input
current of only 0.5 mA making them ideal for use in low
input current applications such as MOS, CMOS, low power
logic interfaces or line receivers.
Features
 Low power consumption
 3.3V Supply voltages
 Dual marked with device part number and DLA
drawing number
 Manufactured and tested on a MIL-PRF-38534 Certified
Line
 QPDSIS-38534, Class H and K
 Three hermetically sealed package configurations
 Performance guaranteed over full military temperature
range: -55°C to +125°C
 Low input current requirement: 0.5 mA
 High current transfer ratio: 1500% typical @ I_F = 0.5 mA
 Low output saturation voltage: 0.11 V typical
 1500 Vdc withstand test voltage
 HCPL-4701/31, -070A/31 function compatibility
Applications
 Military and aerospace
 High reliability systems
 Telephone ring detection
 Microprocessor system interface
 Transportation, medical, and life critical systems
 Isolated input line receiver
 EIA RS-232-C line receiver
 Voltage level shifting
 Isolated input line receiver
 Isolated output line driver
 Logic ground isolation
 Harsh industrial environments
 Current loop receiver
 System test equipment isolation
 Process control input/output isolation
The connection of a 0.1 F bypass capacitor between V_CC and GND is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.