ACPL-336J Datasheet, PDF (1/18 Pages) AVAGO TECHNOLOGIES LIMITED – Rail-to-rail output voltage

ACPL-336J
2.5 Amp Gate Drive Optocoupler with Integrated (V_CE)
Desaturation Detection, Active Miller Clamping, Fault and UVLO Status Feedback
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
Avago’s ACPL-336J gate drive optocoupler features fast
propagation delay with excellent timing skew perfor-
mance. Smart features that are integrated to protect
the IGBT include IGBT desaturation detection with soft-
shutdown protection and fault feedback, undervoltage
lockout and feedback, and active Miller current clamping.
This full-featured and easy-to-implement IGBT gate drive
optocoupler comes in a compact, surface-mountable
SO-16 package for space-savings. It is suitable for driving
IGBTs and power MOSFETs used in motor control and
inverter applications.
Avago isolation products provide reinforced insulation
and reliability that deliver safe signal isolation critical in
high voltage and noisy industrial applications.
Functional Diagram
V E VCC2
VIN+
VLEDDRV
VCC1
Input LED Driver
VLED
UVLO
UVLO
FAULT
VEE1
ANODE
CATHODE
Fault
Decoder
LED2
Output
Driver
DESAT
V CLAMP
LED1
DESAT
VOUT
Soft
Shut
VCLAMP
VEE2 V EE2
• 2.5 A maximum peak output current
• Rail-to-rail output voltage
• 2.5 A Miller Clamp
• Integrated fail-safe IGBT protection
- Desaturation detection, “Soft” IGBT turn-off and
fault feedback
- UnderVoltage LockOut (UVLO) Protection with
feedback
• Integrated input LED driver
• 250 ns maximum propagation delay over temperature
• 30 kV/µs minimum Common Mode Rejection (CMR) at
V_CM = 1500 V
• Wide operating voltage: 15 V to 30 V
• Wide operating temperature range: -40 °C to 105 °C
• SO-16 package with 8 mm clearance and creepage
• Regulatory approvals:
– UL 1577, V_ISO = 5000 V_RMS for 1 min
– CSA
– IEC/EN/DIN EN 60747-5-5 V_IORM = 1414 V_PEAK
Applications
• Isolated IGBT/Power MOSFET gate drive
• Renewable energy inverters
• AC and brushless DC motor drives
• Industrial Inverters
• Switching power supplies
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.