ACPL-331J-000E Datasheet, PDF (1/22 Pages) AVAGO TECHNOLOGIES LIMITED – 1.5 Amp Output Current IGBT Gate Driver Optocoupler

ACPL-331J
1.5 Amp Output Current IGBT Gate Driver Optocoupler
with Integrated (V_CE) Desaturation Detection, UVLO,
Fault Status Feedback and Active Miller Clamping
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The ACPL-331J is an advanced 1.5 A output current, easy-
to-use, intelligent gate driver which makes IGBT VCE fault
protection compact, affordable, and easy-to implement.
Features such as integrated V_CE detection, under
voltage lockout (UVLO), “soft” IGBT turn-off, isolated
open collector fault feedback and active Miller clamping
provide maximum design flexibility and circuit protec-
tion.
The ACPL-331J contains a AlGaAs LED. The LED is
optically coupled to an integrated circuit with a power
output stage. ACPL-331J is ideally suited for driving
power IGBTs and MOSFETs used in motor control inverter
applications. The voltage and current supplied by these
optocouplers make them ideally suited for directly
driving IGBTs with ratings up to 1200 V and 100 A. For
IGBTs with higher ratings, the ACPL-331J can be used to
drive a discrete power stage which drives the IGBT gate.
The ACPL-331J has an insulation voltage of V_IORM = 1230
V_PEAK.
Block Diagram
6, 7
D
ANODE
R
5, 8
I
CATHODE
V
LED1
E
R
2
V_CC1
3
FAULT
SHIELD
LED2
UVLO
DESAT
V_CLAMP
13
V_CC2
11
V_OUT
DESAT
14
9, 12
V_EE
10
V_CLAMP
V_E
16
1, 4
V_S
SHIELD
15
V_LED
Features
• Under Voltage Lock-Out Protection (UVLO)
with Hysteresis
• Desaturation Detection
• Miller Clamping
• Open Collector Isolated fault feedback
• “Soft” IGBT Turn-off
• Fault Reset by next LED turn-on (low to high) after
fault mute period
• Available in SO-16 package
• Safety approvals: UL approved, 5000 V_RMS for 1
minute, CSA approved, IEC/EN/DIN-EN 60747-5-5
approved V_IORM = 1230 V_PEAK
Specifications
• 1.5 A maximum peak output current
• 1.0 A minimum peak output current
• 250 ns maximum propagation delay over
temperature range
• 100 ns maximum pulse width distortion (PWD)
• 50 kV/μs minimum common mode rejection (CMR)
at V_CM = 1500 V
• I_CC(max) < 5 mA maximum supply current
• Wide V_CC operating range: 15 V to 30 V over
temperature range
• 1.0 A Miller Clamp. Clamp pin short to V_EE if not used
• Wide operating temperature range: –40°C to 105°C
Applications
• Isolated IGBT/Power MOSFET gate drive
• AC and brushless DC motor drives
• Industrial inverters and Uninterruptible Power Supply
(UPS)
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.