ACPL-3130-300E Datasheet, PDF (1/20 Pages) AVAGO TECHNOLOGIES LIMITED – Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler

ACPL-3130/J313, ACNW3130
Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The ACPL-3130 contains a GaAsP LED while the ACPL-J313
and the ANCW3130 contain an AlGaAs LED. The LED is
optically coupled to an integrated circuit with a power
output stage. These optocouplers are ideally suited for
driving power IGBTs and MOSFETs used in motor control
inverter applications. The high operating voltage range
of the output stage provides the drive voltages required
by gate controlled devices. The voltage and current
supplied by these optocouplers make them ideally suited
for directly driving IGBTs with ratings up to 1200 V/100 A.
For IGBTs with higher ratings, the ACPL-3130 series can be
used to drive a discrete power stage which drives the IGBT
gate. The ANCW3130 has the highest insulation voltage of
V_IORM = 1414 V_peak in the IEC/EN/DIN EN 60747-5-5. The
ACPL-J313 has an insulation voltage of V_IORM = 1230 V_peak
and the V_IORM = 630 V_peak is also available with the ACPL-
3130 (Option 060).
Functional Diagram
N/C 1
8 V _CC
N/C 1
8 V _CC
ANODE 2
7 V _O ANODE 2
7 VO
CATHODE 3
6 V _O CATHODE 3
6 N/C
N/C 4
SHIELD
5 V _EE
N/C 4
SHIELD
5 V _EE
ACPL-3130 and ACPL-J313
ACNW3130
Truth Table
V_CC – V_EE
V_CC – V_EE
“POSITIVE GOING” “NEGATIVE GOING”
LED
(i.e., TURN-ON)
(i.e., TURN-OFF)
VO
OFF
0 - 30 V
0 - 30 V
LOW
ON
0 - 11 V
0 - 9.5 V
LOW
ON
11 - 13.5 V
9.5 - 12 V
TRANSITION
ON
13.5 - 30 V
12 - 30 V
HIGH
Features
• High speed response.
• Very high CMR.
• Bootstrappable supply current.
• Safety Approval:
UL Recognized
- 3750 V_rms for 1 min. for ACPL-3130/ACPL-J313
- 5000 V_rms for 1 min. for ACNW3130
CSA Approval
IEC/EN/DIN EN 60747-5-5 Approved
- V_IORM = 630 V_peak for ACPL-3130 (Option 060)
- V_IORM = 1230 V_peak for ACPL-J313
- V_IORM = 1414 V_peak for ACNW3130
Specifications
• 2.5 A maximum peak output current.
• 2.0 A minimum peak output current.
• 40 kV/µs minimum Common Mode Rejection (CMR) at
V_CM = 1500 V
• 0.5V maximum low level output voltage (V_OL) eliminates
need for negative gate drive
• I_CC = 5 mA maximum supply current
• Under Voltage Lock-Out protection (UVLO) with
hysteresis
• Wide operating V_CC range: 15 to 30 Volts
• 500 ns maximum switching speeds
• Industrial temperature range: -40°C to 100°C
Applications
• IGBT/MOSFET gate drive
• AC/Brushless DC motor drives
• Industrial inverters
• Switching Power Supplies (SPS)
Note: A 0.1 µF bypass capacitor must be connected between pins V_CC and V_EE.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.