ACNW3410 Datasheet, PDF (1/15 Pages) AVAGO TECHNOLOGIES LIMITED – Rail-to-rail output voltage

ACNW3410
3 Amp Output Current IGBT Gate Drive Optocoupler
with 100 kV/μs Noise Immunity
Data Sheet
Description
The ACNW3410 contains an LED, which is optically coupled to
an integrated circuit with a power output stage. This
optocoupler is ideally suited for driving IGBTs and power
MOSFETs used in motor control inverter applications. The
100 kV/μs noise immunity prevent erroneous drive in noisy
industrial environment. The voltage and high peak output
current supplied by this optocoupler make it ideally suited for
driving IGBT directly. The ACNW3410 has the highest insulation
voltage of V_IORM= 1414 V_peak in the IEC/ EN/DIN EN 60747-5-5.
CAUTION
It is advised that normal static precautions be
taken in handling and assembly of this
component to prevent damage and/or
degradation that may be induced by ESD.
Features
 3.0 A maximum peak output current
 Rail-to-rail output voltage
 UVLO with V_E reference for negative power supply
 150 ns maximum propagation delay
 90 ns maximum propagation delay difference
 LED current input with hysteresis
 100 kV/μs minimum Common Mode Rejection (CMR) at
V_CM = 1500V
 I_CC = 5.0 mA maximum supply current
 Under Voltage Lock-Out Protection (UVLO) with Hysteresis
 Wide Operating V_CC Range: 15V to 30V
 Industrial Temperature Range: –40°C to 105°C
 Safety Approval
— UL Recognized 5000 V_RMS for 1min.
— CSA
— IEC/EN/DIN EN 60747-5-5 V_IORM = 1414 V_peak
Applications
 IGBT/MOSFET gate drive
 AC and brushless DC motor drives
 Renewable energy inverters
 Industrial inverters
 Switching power supplies
Avago Technologies
-1-