ACNV3130 Datasheet, PDF (1/14 Pages) AVAGO TECHNOLOGIES LIMITED – 500 ns maximum propagation delay

ACNV3130
2.5 Amp Output Current IGBT Gate Drive Optocoupler
in 500Mil DIP10 Package
Data Sheet
Description
The ACNV3130 contains an AlGaAs LED, which is optical-
ly coupled to an integrated circuit with a power output
stage. This optocoupler is ideally suited for driving power
IGBTs and MOSFETs used in motor control inverter appli-
cations. The high operating voltage range of the output
stage provides the drive voltages required by gate con-
trolled devices. The voltage and high peak output current
supplied by this optocoupler can be used to drive a dis-
crete power stage make it ideally suited for direct driving
IGBT with ratings up to 1700V/100A. For IGBTs with higher
ratings, this optocoupler can be used to drive a discrete
power stage which drives the IGBT gate. The ACNV3130
has the highest insulation voltage of VIORM= 2262 Vpeak
in the IEC/ EN/DIN EN 60747-5-5.
Functional Diagram
NC 1
ANODE 2
CATHODE ₃
NC 4
NC 5
10 V_CC
9 V_OUT
8 ^NC
7 ^VEE
6 ^NC
Design Note:
- NC denotes not connected
- A 0.1 μF bypass capacitor must be connected between pins V_CC and
V_EE
Truth Table - ACNV3130
V_CC – V_EE
V_CC – V_EE
“POSITIVE GOING” “NEGATIVE GOING”
LED
(i.e., TURN-ON)
(i.e., TURN-OFF)
OFF
0 - 30 V
0 – 30 V
ON
0 – 11V
0 – 9.5V
ON
11 - 13.5V
9.5 – 12V
ON
13.5 – 30V
12 – 30V
V_O
LOW
LOW
TRANSITION
HIGH
Features
 2.5 A maximum peak output current
 2.0 A minimum peak output current
 500 ns maximum propagation delay
 350 ns maximum propagation delay difference
40 kV/μs minimum Common Mode Rejection (CMR) at
V_CM = 1500 V
 I_CC = 5.0 mA maximum supply current
 Under Voltage Lock-Out Protection (UVLO) with
Hysteresis
 Wide Operating V_CC Range: 15 to 30 V
 Industrial Temperature Range: -40°C to 105°C
 Safety Approval Pending
- UL Recognized 7500 V_RMS for 1min.
- CSA
- IEC/EN/DIN EN 60747-5-5 V_IORM = 2262 Vpeak
Applications
 690Vac application
 IGBT/MOSFET gate drive
 AC and Brushless DC motor drives
 Renewable energy inverters
 Industrial inverters
 Switching power supplies
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.