ABA-54563 Datasheet, PDF (1/10 Pages) Agilent(Hewlett-Packard) – 3.4 GHz Broadband Silicon RFIC Amplifier

ABA-54563
3.4 GHz Broadband Silicon RFIC Amplifier
Data Sheet
Description
Features
Avago’s ABA-54563 is an economical, easy-to-use ­internally
50-ohm matched silicon monolithic amplifier that offers
excellent gain and broadband response from DC to
3.4 GHz. Packaged in an ultraminiature industry-standard
SOT-363 package, it requires half the board space of a
SOT-143 package.
At 2 GHz, the ABA-54563 offers a small-signal gain of 23 dB,
output P1dB of 16.1 dB and 27.8 dBm output third order
intercept point. It is suitable for use as buffer ­amplifiers
for wideband applications. They are designed for low
cost gain blocks in cellular applications, DBS ­tuners, LNB
and other wireless communications systems.
At IF frequencies, the ABA-54563 offers good linearity
performance with a typical OIP3 of 35 dBm at 200 MHz.
ABA-54563 is fabricated using Avago’s HP25 silicon
bipolar process, which employs a double-diffused single
polysilicon process with self-aligned submicron emitter
­geometry. The process is capable of simultaneous high
f_T and high NPN ­breakdown (25 GHz f_T at 6V BVCEO). The
process utilizes industry standard device oxide isolation
technologies and ­submicron aluminum multilayer
interconnect to achieve ­superior ­performance, high
uniformity and proven r­ eliability.
• Single +5V Supply
• High linearity
• VSWR < 1.4 throughout operating frequency
• Miniature SOT363 (SC70) Package
• Unconditionally stable
• Lead-free
Typical Performance at +5V/79 mA
2 GHz
• 23 dB Gain
• 27.8 dBm OIP3
• 16.1 dBm P_1dB
• 4.4 dB Noise Figure
200 MHz
• 23 dB Gain
• 35 dBm OIP3
• 18 dBm P_1dB
• 3.6 dB Noise Figure
Surface Mount Package: SOT-363 /SC70
Simplified Schematic
Vcc
RF
Output
& Vcc
Pin Connections and Package Marking
GND 2
GND 1
Output
& Vcc
GND 3
Input
Vcc
Note:
Top View. Package marking provides orientation and identification.
“x” is character to identify date code.
RF
Input
Ground 1
Ground 3
Ground 2