ABA-51563 Datasheet, PDF (1/7 Pages) Agilent(Hewlett-Packard) – 3.5 GHz Broadband Silicon RFIC Amplifier

ABA-51563
3.5 GHz Broadband Silicon RFIC Amplifier
Data Sheet
Description
Features
Avago’s ABA-51563 is an economical, easy-to-
use, internally 50-ohm matched silicon monolithic
­broadband amplifier that offers excellent gain and flat
broadband response from DC to 3.5 GHz. ­Packaged in
an ultraminiature industry-standard SOT-363 package, it
requires half the board space of a SOT-143 package.
At 2 GHz, the ABA-51563 offers a small-signal gain of
21.5 dB, output P1dB of 1.8 dBm and 11.4 dBm output
third order intercept point. It is suitable for use as buffer
amplifiers for wideband applications. They are designed
for low cost gain blocks in cellular applications, DBS tuners,
LNB and other wireless communications systems.
ABA-51563 is fabricated using Avago’s HP25 silicon
bipolar process, which employs a double-diffused single
polysilicon process with self-aligned submicron emitter
geometry. The process is capable of ­simultaneous high
f_T and high NPN breakdown (25 GHz f_T at 6V BVCEO). The
process utilizes ­industry standard device oxide isolation
technologies and submicron aluminum multilayer
interconnect to achieve superior performance, high
uniformity, and proven reliability.
• Operating frequency: DC ~ 3.5 GHz
• 21.5 dB gain
• VSWR < 2.0 throughout operating frequency
• 1.8 dBm output P1dB
• 3.7 dB noise figure
• Unconditionally stable
• Single 5V supply (Id = 18 mA)
• Lead-free option available
Applications
• Amplifier for cellular, cordless, special mobile radio, PCS,
ISM, wireless LAN, DBS, TVRO, and TV tuner applications
Attention:
Surface Mount Package: SOT-363 /SC70
Observe precautions for handling electrostatic
sensitive devices.
ESD Machine Model (Class A)
ESD Human Body Model (Class 1A)
Refer to Avago Application Note A004R:
Electrostatic Discharge Damage and Control.
Pin Connections and Package Marking
GND 2
GND 1
Output
& Vcc
GND 3
Input
Vcc
Note:
Top View. Package marking provides orientation and identification.
“x” is character to identify date code.
Simplified Schematic
Vcc
RF
Input
Ground 1
Ground 3
RF
Output
& Vcc
Ground 2