516-3086-ND Datasheet, PDF (1/2 Pages) AVAGO TECHNOLOGIES LIMITED – CFP2, 850 nm, 100GBASE-SR10 Compliant Pluggable 100G Ethernet Optical Transceiver

AFBR-8420Z
CFP2, 850 nm, 100GBASE-SR10 Compliant
Pluggable 100G Ethernet Optical Transceiver
Product Brief
Description
Avago Technologies’ AFBR-8420Z CFP2 SR10 is a ten
channel pluggable, parallel, fiber optic transceiver for
100Gbps Ethernet Applications. The transceiver supports
high speed serial links over multi-mode fiber at signaling
rates up to 103.125Gb/s (a serial line rate of 10.3125Gb/s
per channel) for link distances up to 100m with OM3 fiber
or 150m with OM4 fiber. The product is compliant with the
CFP2 industry agreement for mechanical and low speed
electrical specifications. High speed electrical and optical
specifications are compliant with IEEE 802.3ba Clause 86
for 100GBASE-SR10 media, Clause 86A for CPPI electrical
interface, and Clause 45 for MDIO.
The transceiver electrical interface uses a 104 contact
edge type connector, as specified in the CFP2 industry
agreement. The optical interface uses a 24-fiber MTP®
(MPO) fiber optic connector. This transceiver incorporates
Avago Technologies proven integrated circuit and VCSEL
technologies to provide reliable, high performance and
consistent service.
Digital diagnostic monitoring information (DMI) is present
in the AFBR-8420Z per the CFP2 industry agreement,
providing real time monitoring information of transmitter,
receiver and module operating conditions over the MDIO
interface.
Applications
• 100 Gb/s Ethernet Interconnects (802.3ba Clause 86)
• 10×10 Gb/s Ethernet Interconnects (802.3ae Clause 52)
• Datacom/Telecom Switch and Router Connections
• Data Aggregation and Density Applications
Features
• Links up to 100m using OM3 fiber and 150m using
OM4 fiber
• CFP2 Power Dissipation Class 2 with CDRs in bypass.
CDRs are bypassed for lower power dissipation by
default
• CFP2 Power Dissipation Class 3 with CDRs ON
• Proven High Reliability 850nm technology: Avago
VCSEL array transmitter and Avago PIN array receiver.
• Compliant to 100GbE specifications 802.3ba
(100GBase-SR10 and CPPI) up to 100m OM3 and 150m
OM4 fiber.
• Compliant to 40GbE specifications 802.3ba (40GBase-
SR4 and XLPPI) up to 100m OM3 and 150m OM4 fiber.
• Compatible with 10GE SR specifications per 802.3ae
(10GBASE-SR) up to 100m OM3 fiber.
• CFP2 10x10Gbit/s Host Pin Map
• Class 1 eye safe per IEC60825-1 and CDRH
• Wide case temperature range (0°C to 70°C)
• Utilizes standard 24 lane optical fiber with MTP® (MPO)
optical connector for high density and thin, light-
weight cable management
• Diagnostic features per CFP2 using MDIO. Real time
monitoring of:
- Transmitter average optical power
- Received average optical power
- Laser bias current
- Temperature
- Supply Voltage
• Host Lane Loopback (eLoop) and Network Lane
Loopback (oLoop) functionality
• Integrated CDRs on each transmit and receive lane
• CDRs can be bypassed for lower power dissipation
• CFP Management Interface Specification Version 2.2
• CFP2 Hardware Specification Revision 1.0
• Compliant to RoHS directives
Patent - www.avagotech.com/patents