AS10515F16MIL_06 Datasheet, PDF (1/4 Pages) Austin Semiconductor – Quad Line Receiver

Quad Line Receiver
Austin Semiconductor, Inc. ^{AS10515F16MIL}
Quad Line Receiver
AVAILABLE AS MILITARY
SPECIFICATIONS
• Military Equivalent Screening - 883 1.2.2
GENERAL DESCRIPTION
The AS10515F16MIL is a quad differential amplifier
designed for use in sensing differential signals over long lines.
The base bias supply (V_BB) is made available at pin 9 to make
the device useful as a Schmitt trigger, or in other applications
where a stable reference voltage is necessary.
Active current sources provide the AS10515F16MIL with
excellent common mode noise rejection. If any amplifier in
a package is not used, one input of that amplifier must be
connected to V_BB (pin 9) to prevent upsetting the current
source bias network.
• P_D = 150mW Max/Pkg (No Load)
• t_pd = 2.0ns typ
• t_r, t_f = 2.0ns type (20% - 80%)
PIN ASSIGNMENTS
FUNCTION FLATS BURN-IN
(CONDITION C)
V_CC1
A_OUT
B_OUT
A_IN\
A_IN
B_IN
B_IN\
V_EE
V_BB
C_IN\
C_IN
D_IN
D_IN\
C_OUT
D_OUT
V_CC2
5
GND
6
51 Ω to V_TT
7
51 Ω to V_TT
8
V_BB
9
GND
10
GND
11
V_BB
12
V_EE
13
V_BB
14
V_BB
15
GND
16
GND
1
V_BB
2
51 Ω to V_TT
3
51 Ω to V_TT
4
GND
PIN ASSIGNMENT
(Top View)
16-Pin FlatPack (F)
D_IN\ 1
C_OUT 2
D_OUT 3
V_CC2 4
V_CC1 5
A_OUT 6
B_OUT 7
A_IN\ 8
16 D_IN
15 C_IN
14 C_IN\
13 V_BB
12 V_EE
11 B_IN\
10 B_IN
9 A_IN
BURN-IN CONDITIONS:
V_TT = -2.0V MAX/ -2.2V MIN
V_EE = -5.7V MAX/ -5.2V MIN
V_BB = All pins designated for V_BB must be tied together, no
external voltage applied.
NOTES
1. V_BB to be used to supply bias to the AS10515F16MIL only and
bypassed (when used) with 0.01 µF to 0.1 µF capacitor.
2. When the input pin with the bubble goes positive, the output goes
negative.
LOGIC DIAGRAM
4
2
5
6
7
3
10
14
11
12
13
15
V_BB
9
For more products and information
please visit our web site at
www.austinsemiconductor.com
AS10515F16MIL
Rev. 2.1 07/06
Austin Semiconductor, Inc. reserves the right to change products or specifications without notice.
1