S6510 Datasheet, PDF (1/6 Pages) AUK corp – SIMPLE BALLAST CONTROLLER

F
Semiconductor
S6510
SIMPLE BALLAST CONTROLLER
Description
The device provides simple and performance electronics ballast control function for the half
bridge L/C resonant inverter. This device is optimized for electronics ballast requiring a
minimum board area, reduced component count and low power dissipation.
Internal soft start circuitry eliminates the need for an external soft start PTC resistor.
The initial soft start frequency and soft start time can be easily adjusted depending on the
types of lamp. Prevent burning out of switches in no lamp condition. Internal 18V regulator
clamps Vcc line of supply voltage for eliminating an external zener diode.
Features
• No lamp protection
• Low Start up & Operating Current
• Internal Soft Start
• Flexible Soft Start Frequency
• Trimmed 1.5% internal Reference
• Under Voltage Lock Out with Hysteresis
• High Current Totem Pole Gate Drive
Ordering Information
Type NO.
Marking
S6510
S6510
Package Code
SOP-8
Outline Dimensions
unit : mm
PIN Collection
KSI-8012-001
1