S6500P Datasheet, PDF (1/7 Pages) AUK corp – POWER FACTOR CORRECTION

F
Semiconductor
S6500P
POWER FACTOR CORRECTION
Description
This device is power factor correction controller using a discontinues conduction mode of
boost converter. Especially, it is optimized for electronic ballasts which prevent abnormal
functions in load runaway and feedback loop fault conditions and low power and high
density power supplies which require minimum board size. The external component R/C
filter is not necessary because the R/C filter is included in current sense block. This is the
improved version with a pin out equivalent to world standard.
Features
• Dynamic, Static & Feedback OVP
• Extremely Low Start up Current (30uA Typ.)
• Very Low Operating Current (4mA Typ.)
• Internal Self Start Timer
• Current Sense with Internal RC Filter
• Trimmed ±1.5% internal Reference
• Under Voltage Lock Out with Hysteresis
• Pin Compatible to World Standard
• High Current Totem Pole Gate Drive
Applications
• Electronic Ballast
• SMPS
Ordering Information
Type NO.
Marking
S6500P
S6500P
Outline Dimensions
Package Code
DIP-8
PIN Collection
unit : mm
KSI-L013-001
1