S33201M Datasheet, PDF (1/6 Pages) AUK corp – Rail to Rail Single OP AMP

.
Semiconductor
S33201M
Rail to Rail Single OP AMP
Description
The S33201M is operational amplifiers provide rail-to-rail operation on both the input and output. The
inputs can be driven as high as 200mV beyond the supply rails without phase reversal on the outputs,
and the output can swing within 50mV of each rail. This rail-to-rail operation enables the user to make
full use of the supply voltage range available. It is designed to work at very low supply voltages (± 0.9 V)
yet can operate with a supply of up to +12V and ground. Output current boosting techniques provide a
high output current capability while keeping the drain current of the amplifier to a minimum.
Also, the combination of low noise and distortion with a high slew rate and drive capability make this an
ideal amplifier for audio applications.
Features
• Low Voltage, Single Supply Operation (+1.8 V and Ground to +12 V and Ground)
• Input Voltage Range Includes both Supply Rails
• Output Voltage Swings within 50 mV of both Rails
• No Phase Reversal on the Output for Over-driven Input Signals
• High Output Current (I_SC = 30 mA, Typ)
• Low Supply Current (I_CC = 0.9 mA, Typ)
• 600Ω Output Drive Capability
• Typical Gain Bandwidth Product = 2.2 MHz
Applications
• Low cost general purpose applications
• A/D buffer
• Smart card readers
• Keyless entry
• Audio applications
• Hard disk drives
• Cellular phones
• DSP interface
• Portable test instruments
• Telephone systems
• Digital still cameras
• MP3 players
Ordering Information
Type NO.
Marking
S33201M
332
Package Code
SOT-25
KSD-I5O002-000
1