CLWTC-1000 Datasheet, PDF (1/1 Pages) Advanced Thermal Solutions, Inc. – AUTOMATIC CONTROLLER FOR THE CLWT-067 AND CLWT-115 WIND TUNNELS

WIND TUNNEL CONTROLLER
CLWTC-1000^TM
AUTOMATIC CONTROLLER FOR THE CLWT-067^TM AND CLWT-115^TM WIND TUNNELS
Custom built for the CLWT-067^TM and
CLWT-115^TM closed loop wind tunnels,
the CLWTC-1000^TM is designed to
automatically control the air flow
and temperature through the test
chamber. The controller is operated
with a Windows PC (not included) to
manage and measure air speed and air
temperature, and to obtain continuous
data on the devices under test.
The CLWTC-1000^TM controller features
easy to use StageControl 1000 ^TM software, a version of the proven software used with
other ATS wind tunnel controllers. The controller provides the PC with a functioning
Data Center for viewing information and monitoring events. The user can set a range of
velocities at different temperatures from the software to run the wind tunnel automatically.
The CLWTC-1000^TM also has manual controls to raise and lower the air temperature, in
addition to changing temperature via the PC.
It is highly recommended that users of the CLWT-067^TM and CLWT-115^TM utilize the
CLWTC-1000^TM Closed Loop Wind Tunnel Controller as it automates the control of
temperature and velocity automatic and minimizes the chances for errors using multiple
and/or less capable controlling devices.
The CLWTC-1000’s interface is compatible with any Windows PC.
OVERALL DIMENSIONS (L X W X H)
34.3 cm x 25.4 cm x 17.8 cm
(13.5” x 10” x 7”)
MATERIALS
SHEET METAL
WEIGHT
4.5 kg (10 lbs.)
StageControl 1000 Software
For further technical information, please contact Advanced Thermal
Solutions, Inc. at 1-781-769-2800 or www.qats.com
FEATURES:
» D ata Center
View data and monitor events
at the data center
» Temperature Control
Precisely controls wind tunnel
temperatures up to 85°C
» V elocity Control
Controls the blower RPM and
allows changes in air flow
rates
» Free Lifetime Tech Support
APPLICATIONS:
» H igh Temperature Testing
Users can evaluate
the effects of elevated
temperatures on component
and PCB response and
reliability
» H eat Sink Characterization
Characterize a variety of heat
sink sizes for low speed and
forced convection cooling
» Sensor Calibration
Precision temperature
and velocity controls allow
accurate calibration of
sensors
» Component Testing
An ideal test vehicle for indi-
vidual or multiple component
testing
» Multiple PCB Testing
Test actual or simulated
PCBs for thermal and
flow distribution
89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 F: 781.769.9979 | WWW.QATS.COM
R3_0215