CIP-1000 Datasheet, PDF (1/1 Pages) Advanced Thermal Solutions, Inc. – CONTROLLABLE ISOTHERMAL PLATE SYSTEM FOR A HIGHLY ACCURATE, ADJUSTABLE HEAT SOURCE

CONTROLLABLE ISOTHERMAL PLATE
CIP-1000^TM
CONTROLLABLE ISOTHERMAL PLATE SYSTEM FOR A HIGHLY ACCURATE, ADJUSTABLE HEAT SOURCE
The CIP-1000^TM, is Controllable Isothermal Plate is a
system for providing an isothermal surface that can
be precisely temperature-controlled from 10 to 170°C
with an accuracy of +/- 0.1°C.
The CIP-1000^TM system features a 75 mm diameter
isothermal copper plate whose constant temperature
can be raised or lowered both automatically and
manually. A three wire RTD sensor and integral PID
controller ensure specific, uniform temperature across
the entire plate.
The laboratory-quality CIP-1000^TM system includes a separate controller unit that
allows both pre-programmed and hands-on temperature management. The controller
communicates with a PC through a choice of either a USB or RS232 connection. The
included stageTHERM^TM software allows easy temperature variation of the isothermal plate
for testing and other applications. Different plate temperature settings can be programmed
for automated ramping, including hold times for each step. Alternatively, the temperature of
the plate can be manually adjusted in increments as
small as 0.1^oC using the system’s digital controls.
SENSOR TYPE
Time and temperature data are accurately recorded
and can be downloaded or viewed in easy to read
graphs and tables. If needed, the CIP-1000^TM plate
is easily removable for rework, surface treatment,
attaching DUT and other such tests. The system can
also be customized for special applications including
larger plates and different temperature ranges.
Three-wire 100 Ohm RTD
SURFACE TEMPERATURE RANGE
10°C to 170°C
CONTROLLER ENVIRONMENTAL TEMPERATURE
0 to 50°C
LONG TERM TEMPERATURE STABILITY
Less than 0.002°C
The CIP-1000^TM system can be used in a wide
range of applications, including component and
environmental testing, product development, quality
control and life science studies.
DISPLAY RESOLUTION
Less than 0.1°C
CONTROLLER DIMENSIONS (L X W X H)
269.25 mm x 182.9 x 124.45 mm
(10.6” x 7.2” x 4.9”)
PLATE ASSEMBLY DIMENSIONS
114.5 mm x 78.75 mm (4.5” x 3.1”)
PC CONNECTIONS
USB, RS232
Controller
Front
Bottom
POWER
115/230 VAC, 50-60 Hz
For further technical information, please contact Advanced Thermal
Solutions, Inc. at 1-781-769-2800 or www.qats.com
FEATURES:
» Wide Temperature Range
Produces surface tempera-
tures from 10°C to 170°C
» Highly Accurate Control
Temperature can be con-
trolled to less than 0.1°C
display resolution
» Fully Programmable
Plate temperature settings
can be programmed for
automated ramping, including
hold times for each step
» R emovable Copper Plate
CIP-1000^TM plate is easily
removable for rework, surface
treatment, attaching DUT and
other such tests
» P ID Control
Unipolar or bipolar, PID con-
trol with auto-tuning capability
» Free Lifetime Tech Support
APPLICATIONS:
» Telecommunications
» A utomotive
» Medical Instrumentation
» Thermal Management
» Pharmaceuticals
» Chemical
89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 F: 781.769.9979 | WWW.QATS.COM
R2_0215