BWT-100 Datasheet, PDF (1/1 Pages) Advanced Thermal Solutions, Inc. – RESEARCH QUALITY BENCHTOP WIND TUNNEL

BENCHTOP WIND TUNNEL
BWT-100™
RESEARCH QUALITY BENCHTOP WIND TUNNEL
The BWT-100™ is a unique, small
benchtop portable wind tunnel
for thermal characterization of
components, boards and heat sinks.
The unit is made of Plexiglas, weighs
less than 4 kg (8 lbs) and produces
flows up to 2 m/s (400 ft/min).
It can be placed horizontally or vertically
to adapt to direction-sensitive cooling
systems. The BWT-100™ test section
is rear accessed and accommodates
a removable test plate for mounting of the test specimens. In another version of the test
plate, insulated heat slugs are provided for heat sink characterization tests. Four small
DC muffin fans can be individually controlled to generate the flow inside the BWT-100™.
The test section is flush-mounted to the base of the BWT-100™ to eliminate any flow
disturbances. Instrument ports are provided on the front panel of the unit for placement
of temperature, velocity and pressure sensors.
Sensors to measure the flow parameters are also supplied by ATS as optional
accessories.
* Power supply not included.
RECOMMENDED ACCESSORIES:
WTC-100™
Wind Tunnel Controller
ATVS-NxT™
Hot Wire Anemometer
HP-97^TM
High Power Component Simulator
OVERALL DIMENSIONS (L X W X D)
58 x 30.4 x 18.4cm
(22.8 x 12 x 7.24")
TEST SECTION DIMENSIONS (L X W X D)
30.6 x 25.4 x 2.5cm
(12 x 10 x 1”)
FLOW RANGE
0 to 2 m/s (0 to 400 ft/min)
NO. OF SENSOR PORTS
2
MATERIAL
Aluminum, Plexiglas
WEIGHT
4 kg (8 lbs)
POWER
24VDC at 0.02 Amps
For further information, please contact Advanced Thermal
Solutions, Inc. at 1-781-769-2800 or www.qats.com
FEATURES:
» Heat Sink Characterization
Characterize a variety of heat
sink sizes for natural and
forced convection cooling
» Heat Sink Comparison
Test two heat sinks side-
by-side and compare their
thermal performance in the
same environment
» Component Testing
An ideal test vehicle for
component characterization
» Multiple PCB Testing
Test actual or simulated
PCBs for thermal and
air flow distribution
» Flow Visualization
Observe flow distribution
in the tunnel by smoke or
buoyant bubbles through the
all Plexiglas^® test section
» Variable Speed
Change flow rates by
controlling the fan RPM
» Quick Access
Quickly change the test
specimen through the
front access test section
» Sensor Ports
Measure pressure,
velocity and temperature
through the sensor ports
» Data Center
View data and monitor
events at the data center
(with optional accessories)
Software not included
» Free Lifetime Tech Support
89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 F: 781.769.9979 | WWW.QATS.COM
R6_0515