ATS-53210P-C1-R0 Datasheet, PDF (1/1 Pages) Advanced Thermal Solutions, Inc. – High Performance BGA Cooling Solutions with maxiGRIP™ Attachment

High Performance BGA Cooling
Solutions with maxiGRIP™ Attachment
ATS PART # ATS-53210P-C1-R0
Features & Benefits
» High aspect ratio, straight fin heat sinks that are ideal for compact PCB
environments
» maxiGRIP™ attachment applies steady, even pressure to the
component and does not require holes in the PCB
» Designed specifically for BGAs and other surface mount packages
» Meets Telcordia GR-63-Core Office Vibration, ETSI 300 019
Transportation Vibration, and MIL-STD-810 Shock testing and
Unpackaged Drop Testing standards
» Comes preassembled with high performance, phase change, thermal
interface material
» “Keep-Out” Requirements: An “Un-Populated” boarder zone of 5
mm around the component is necessary to facilitate the Installation/
Removal of the maxiGRIP™. Please refer to the maxiGRIP™ Keep-
Out Guidelines and maxiGRIP™ Installation/Removal Instructions for
further details
Thermal Performance
Air Velocity
FT/MIN
M/S
200
1.0
300
1.5
400
2.0
500
2.5
600
3.0
700
3.5
800
4.0
*Image above is for illustration purposes only.
Thermal Resistance
°C/W (UNDUCTED FLOW) °C/W (DUCTED FLOW)
7.8
5.1
6.3
5.5
5.0
4.5
4.2
4.0
Product Details
DIMENSION A
21 mm
DIMENSION B
21 mm
DIMENSION C
17.5 mm
DIMENSION D
21 mm
Notes:
1) Dimensions are measured in millimeters
2) Dimensions A & B refer to component size
3) Dimension C = the height of the heat sink shown above and does not
include the height of the attachment method
4) ATS reserves the right to update or change it products without
notice
5) Contact ATS to learn about custom options available
INTERFACE MATERIAL
FINISH
CHOMERICS T766 BLUE ANODIZED
For more information, to find a distributor or to place an order, visit www.qats.com or
call: 781.769.2800 (North America); [phone] (Europe).
REV1_0908