ATS-1038-C2-R0_DS Datasheet, PDF (1/1 Pages) Advanced Thermal Solutions, Inc. – maxiFLOW™ Cross Cut High Performance Heat Sinks with Metal Push Pin

maxiFLOW™ Cross Cut
High Performance Heat Sinks
with Metal Push Pin
ATS PART # ATS-1038-C2-R0
Features & Benefits
» For larger heat sinks and higher pre-loads, push pins with compression
springs are an effective mounting choice. The push pin has a flexible
barb at the end that is designed to engage with a pre-drilled hole in
a PWB. The compression spring adds the necessary force to hold
the assembly together. Provides better thermal performance than
comparable size straight fin and pin fin heat sinks
» Features proven high performance maxiFLOW™ heat sink spread fin
array to maximize cooling surfaces
» Ideal for tight spaced components where wider heat sinks can’t be
used
» Provided with pre-assembled thermal interface material centered on
base
» Brass push pin with steel compression spring
» Reccomended through hole size in PCB is 3.00 mm
Thermal Performance
Air Velocity
FT/MIN
M/S
200
1.0
300
1.5
400
2.0
500
2.5
600
3.0
*Image above is for illustration purposes only.
Thermal Resistance (°c/w UNDUCTED)
AIR FLOW STRAIGHT
AIR FLOW SIDEWAYS
5
6.2
3.9
4.9
3.3
3.9
2.8
3.3
2.5
3
Product Details
DIMENSION A
40 mm
DIMENSION B
38 mm
DIMENSION C
10 mm
DIMENSION D
47 mm
Notes:
1) Dimension C = heat sink height from bottom of the base to the top
of the fin field.
2) Thermal performance data are provided for reference only. Actual
performance may vary by application.
3) ATS reserves the right to update or change its products without
notice
4) Contact ATS to learn about custom options available
INTERFACE MATERIAL
FINISH
CHOMERICS T-766 GREEN ANODIZED
For more information, to find a distributor or to place an order, visit www.qats.com or
call: 781.769.2800 (North America); [phone] (Europe).
REV1_0908