English
Language : 

U2510B Datasheet, PDF (9/15 Pages) ATMEL Corporation – All-Band AM/FM Receiver and Audio Amplifier
U2510B
Test Circuit
Vi1
(50 Ω)
Vi2
(50 Ω)
R8
50 Ω
R5
150 Ω
R6 C24
LA
100 Ω 100 nF
R7 C25
150 µH
75 Ω 10 nF
AM IFT
14 13 12
T1
455 kHz
CF1
C2
C3
C4
T2
43 pF 22 pF
L1 L2
18 pF
R4
2.2 kΩ
C7 C6
4.7 µF 22 nF
C19
5.6 pF
C20
22 nF
11 10 9
8
7
6
5
U2510B
C5
22 pF A B
S4
AB
S5
T4
R3
150 kΩ
C25
C23
100
pF
68 nF C B
C8
4.7 µF
C24
18 pF
S6 A
4
3
2
1
Vmute
15 16 17 18 19 20 21 22 23 24 25 26 27 28
CF2
B A S1 B A
C22
A
C9
10.7 MHz
S3
10 nF off B
10 nF
R1
D1 LED
C15
390 Ω
ViIF
Tape
R2
R9
S2 FM 10 kΩ
3 kΩ
C21 AM
10 nF
C14
C10
C11
100 nF 10 µF 10 nF
C12
C13
10 µF 470 µF
220 µF
RL
8 Ω/
2W
ILED
VD
Vi3
VS
Vo
GND
13913
Figure 16. Test circuit
Application
General
The U2510B is a bipolar monolithic IC for use in radio
sets, for example, headphone receivers, radio recorders
and clock radios. The IC contains all AM, FM, AF and
switching function blocks necessary to construct these
kinds of radio receivers using only few components
around the IC. In the design, special efforts were made to
get good performance for all AM bands (short and long
wave).
The implementation of enhanced functions (options)
makes it possible to improve the radio’s performance and
to produce radios with interesting features. In this case
few (external) parts have to be changed or added. By
using all or some of the options offered by the U2510B
different types or classes of radios can be designed to the
customer ’s requirements with the same IC.
One of the general advantages of using the U2510B is the
fact that all receiver functions (including the options) are
integrated and tested on a system level. Therefore, two
additional cost-savings are achieved by:
1. Shorter development time through less technical
problems and
2. Higher reproductivity and low reject level in the set
production line.
Another advantage, due to the technology of the
U2510B, is the wide operating voltage range, espe-
cially the upper limit (13 V). This feature allows the
use of soft power supply for line powered radios
which can also reduce the set’s total cost.
Rev. A3, 23-Feb-01
9 (15)