AT77C104B_08 Datasheet, PDF (8/46 Pages) ATMEL Corporation – FingerChip Thermal Fingerprint Sweep Sensor, Hardware Based, Navigation and Click Function, SPI Interface

Table 4-3. Resistance
Parameter
ESD
On pins HBM (Human Body Model) CMOS I/O
On die surface (zap gun) air discharge
Mechanical Abrasion
Number of cycles without lubricant
Multiply by a factor of 20 for correlation with a real finger
Chemical Resistance
Cleaning agent, acid, grease, alcohol, diluted acetone
Min Value
2 kV
±16 kV
Standard Method
MIL-STD-883 method 3015.7
NF EN 6100-4-2
200,000
MIL E 12397B
4 hours
Internal method
Table 4-4. Explanation of Test Levels
Level Description
I
100% production tested at +25°C
II
100% production tested at +25°C, and sample tested at specified temperatures (AC testing done on sample)
III
Sample tested only
IV
Parameter is guaranteed by design and/or characterization testing
V
Parameter is a typical value only
VI
100% production tested at temperature extremes
D
100% probe tested on wafer at T_amb = +25°C
Table 4-5. Specifications
Parameter
Symbol
Test Level
Min
Typ
Max
Unit
Resolution
IV
50
Micron
Size
IV
8 × 232
Pixel
Yield: Number of bad pixels
I
5
Bad pixels
Equivalent Resistance on TPP pin
I
23
35
47
Ohm
8 AT77C104B
5347F–BIOM–3/08