English
Language : 

AT27LV020A_07 Datasheet, PDF (5/15 Pages) ATMEL Corporation – 2-Megabit (256K x 8) Low Voltage OTP EPROM
◁
AT27LV020A
8. DC and Operating Characteristics for Read Operation
Symbol Parameter
Condition
Min
Max
Units
VCC = 3.0V to 3.6V
ILI
Input Load Current
VIN = 0V to VCC
±1
µA
ILO
IPP1(2)
Output Leakage Current
Read/Standby Current(1)
VOUT = 0V to VCC
VPP = VCC
±5
µA
10
µA
ISB
VCC Standby Current(1)
ISB1 (CMOS), CE = VCC ± 0.3V
ISB2 (TTL), CE = 2.0 to VCC + 0.5V
20
µA
100
µA
ICC
VCC Active Current
f = 5 MHz, IOUT = 0 mA, CE = VIL
8
mA
VIL
Input Low Voltage
-0.6
0.8
V
VIH
Input High Voltage
2.0
VCC + 0.5
V
VOL
Output Low Voltage
IOL = 2.0 mA
0.4
V
VOH
Output High Voltage
IOH = -2.0 mA
2.4
V
VCC = 4.5V to 5.5V
ILI
Input Load Current
VIN = 0V to VCC
±1
µA
ILO
IPP1(2)
Output Leakage Current
Read/Standby Current(1)
VOUT = 0V to VCC
VPP = VCC
±5
µA
10
µA
ISB
VCC Standby Current(1)
ISB1 (CMOS), CE = VCC ± 0.3V
ISB2 (TTL), CE = 2.0 to VCC + 0.5V
100
µA
1
mA
ICC
VCC Active Current
f = 5 MHz, IOUT = 0 mA, CE = VIL
25
mA
VIL
Input Low Voltage
-0.6
0.8
V
VIH
Input High Voltage
2.0
VCC + 0.5
V
VOL
Output Low Voltage
IOL = 2.1 mA
0.4
V
VOH
Output High Voltage
IOH = -400 µA
2.4
V
Notes: 1. VCC must be applied simultaneously with or before VPP, and removed simultaneously with or after VPP.
2. VPP may be connected directly to VCC, except during programming. The supply current would then be the sun of ICC and IPP.
5
0549G–EPROM–12/07
 ▷