|
U2100B Datasheet, PDF (4/14 Pages) TEMIC Semiconductors – Timer Control for Triac and Relay | |||
|
◁ |
3. General Description
The monostable integrated power-control circuit U2100B can be used according to the mode
selection in relay or triac applications. In addition, it can be used in triac applications for two-wire
systems as power switch (the load in series to the switch), where the supply voltage for the con-
trol unit is gained from the remaining phase angle (αmin operation).
Figure 3-1. Two-wire Circuit
L
Control
N
Figure 3-2. Three-wire Circuit
L
Control
N
For three-wire switch systems, two operational modes are possible:
â Zero voltage switch operation for triac control
â Static operation for relay control
4 U2100B
4769CâINDCOâ07/05
|
▷ |