E5130 Datasheet, PDF (3/7 Pages) ATMEL Corporation – LOW VOLTAGE CMOS DRIVER CIRCUIT

e5130
Absolute Maximum Ratings
Absolute maximum ratings define parameter limits which, if exceeded, may permanently change or damage the device.
All inputs and outputs on circuits are highly protected against electrostatic discharges.
However, precautions to minimize build-up of electrostatic charges during handling are recommended.
The circuits are protected against supply voltage reversal for typically 5 minutes, if the current is limited to 120 mA.
Parameters
Symbol
Value
Unit
Supply voltage
Input voltage range, all inputs
Operating ambient temperature range
V_DD - V_SS
-0.3 to +5
V
V_I
V_SS - 0.3 to V_DD + 0.3
V
-20 to +70
°C
Storage temperature range
-40 to +125
°C
Lead temperature during soldering at 2 mm distance, 10 s
260
°C
Electrical Characteristics
V_SS = 0 V, V_DD = +1.5 V, T_amb = +25°C, unless otherwise specified. All voltage levels are measured with reference to V_SS.
Parameters
Test Conditions
Symbol
Min.
Typ.
Max.
Unit
Operating voltage
Operating temperature
Operating current (standby)
Drive Output OUT1 to OUT4
V_DD = 3.6 V, R_L12 = R_L34 = R
IN1 to IN4 at V_DD or V_SS, TRI at V_SS
V_DD
T_amb
I_DD
1.1
3.6
V
-10
60
°C
0.05
1
µA
Output current
Output current
Output current
Delay time
Delay time
V_DD = 1.2 V, R_L12 = R_L34 = 200 W
V_DD = 1.5 V, R_L12 = R_L34 = 200 W
V_DD = 3.0 V, R_L12 = R_L34 = 200 W
V_DD = 3 V, C_L = 50 pF
V_DD = 1.5 V, C_L = 50 pF
see Figure 3, note 1
I_OUT
±4.3 ±4.75
mA
I_OUT
±5.7 ±6.20
mA
I_OUT
±12
±13
mA
T_Dr, T_Df
35
60
ns
T_Dr, T_Df
80
150
ns
Rise-/fall time
Rise-/fall time
V_DD = 3 V, C_L = 50 pF
t_r, t_f
8
15
ns
V_DD = 1.5 V, C_L = 50 pF
see Figure 3, note 2
t_r, t_f
12
25
ns
Digital Input IN1 to IN4
Input current
Input current
Threshold
Hysteresis
Tristate Input TRI
V_IL = 0 V
V_IH = V_DD
V
mV
I_IL
I_IH
V_TH
V_HYST
-100
nA
100
nA
V_DD/2
V
50
mV
Input current TRI
V_IH = V_DD
I_IH
0.15
0.4
1.2
µA
3
4730A–CLOCK–07/03