|
AT91SAM9260_09 Datasheet, PDF (24/47 Pages) ATMEL Corporation – AT91 ARM Thumb Microcontrollers | |||
|
◁ |
8.2.4
⢠Error detection
â Refresh Error Interrupt
⢠SDRAM Power-up Initialization by software
⢠CAS Latency of 1, 2 and 3 supported
⢠Auto Precharge Command not used
Error Corrected Code Controller
⢠Tracking the accesses to a NAND Flash device by triggering on the corresponding chip select
⢠Single bit error correction and 2-bit Random detection
⢠Automatic Hamming Code Calculation while writing
â ECC value available in a register
⢠Automatic Hamming Code Calculation while reading
â Error Report, including error flag, correctable error flag and word address being
detected erroneous
â Support 8- or 16-bit NAND Flash devices with 512-, 1024-, 2048- or 4096-bytes
pages
24 AT91SAM9260
6221JSâATARMâ17-Jul-09
|
▷ |