AT86RF212 Datasheet, PDF (22/173 Pages) ATMEL Corporation – Low Power 800/900 MHz Transceiver for IEEE 802.15.4- 2006, ZigbeeTM, and ISM Applications

Register 0x1F (MAN_ID_1):
Table 4-12. Register 0x1F (MAN_ID_1)
Bit
7
6
5
4
3
2
1
0
Name
MAN_ID_1[7:0]
Read/Write
R
Reset Value 0
0
0
0
0
0
0
0
• Bit 7:0 – MAN_ID_1
Bits [15:8] of the 32-bit JEDEC manufacturer ID are stored in register bits MAN_ID_1.
Bits [7:0] are stored in register 0x1E (MAN_ID_0). The higher 16 bits of the ID are not
stored in registers.
Table 4-13. JEDEC Manufacturer ID – Bits [15:8]
Register Bits
Value
State Description
MAN_ID_1
0x00
Atmel JEDEC manufacturer ID
Bits [15:8] of 32 bit manufacturer ID: 00 00 00 1F
4.6 Sleep/Wake-up and Transmit Signal (SLP_TR)
Pin 11 (SLP_TR) is a multi-functional pin. Its function relates to the current state of the
AT86RF212 and is summarized in Table 4-14. The radio transceiver states are
explained in detail in section 5.
Table 4-14. SLP_TR Multi-functional Pin
Transceiver Status
Function
Transition Description
PLL_ON
TX start
L Æ H Starts frame transmission
TX_ARET_ON
TX start
L Æ H Starts TX_ARET transaction
BUSY_RX_AACK
TX start
LÆH
Starts ACK transmission during RX_AACK slotted operation, see section
5.2.3.5.
TRX_OFF
Sleep
L Æ H Takes the radio transceiver into SLEEP state, CLKM disabled
SLEEP
Wakeup
H Æ L Takes the radio transceiver back into TRX_OFF state, level sensitive
RX_ON
Disable CLKM
L Æ H Takes the radio transceiver into RX_ON_NOCLK state and disables CLKM
RX_ON_NOCLK
Enable CLKM
H Æ L Takes the radio transceiver into RX_ON state and enables CLKM
RX_AACK_ON
Disable CLKM
LÆH
Takes the radio transceiver into RX_AACK_ON_NOCLK state and
disables CLKM
RX_AACK_ON_NOCLK Enable CLKM
H Æ L Takes the radio transceiver into RX_AACK_ON state and enables CLKM
In states PLL_ON and TX_ARET_ON, pin SLP_TR is used as trigger input to initiate a
TX transaction. Here pin SLP_TR is sensitive on rising edge only.
After initiating a state change by a rising edge at pin SLP_TR in radio transceiver states
TRX_OFF, RX_ON or RX_AACK_ON, the radio transceiver remains in the new state as
long as the pin is logical high and returns to the preceding state with the falling edge.
22 _AT86RF212
8168A-AVR-06/08