ATA6836C_14 Datasheet, PDF (20/21 Pages) ATMEL Corporation – Hex Half-bridge Driver with Serial Input Control

13. Revision History
Please note that the following page numbers referred to in this section refer to the specific revision mentioned, not to this
document.
Revision No.
History
4952N-AUTO-05/14
• Section 7 “Electrical Characteristics” number 5.15 on page 13 updated
4952M-AUTO-04/14
• Part datasheet in the latest template
4952L-AUTO-10/13
• Part number ATA6836 removed from the datasheet
4952K-AUTO-03/12
• Section 3.5 “Short-circuit Protection” on page 9 updated
4952J-AUTO-03/11
• Section 10.1 “Application Notes” on page 17 updated
4952I-AUTO-08/10
• Table 2-1 “Pin Description SO28” on page 4 updated
• Ordering Information page 19 changed
4952H-AUTO-02/10
• Section 7 “Electrical Characteristics” numbers 5.10 and 5.11 on page 13 updated
4952G-AUTO-12/09
• Section 7 “Electrical Characteristics” number 1.2 on page 11 updated
• Put datasheet in a new template
4952F-AUTO-07/09
• Section 4 “Absolute Maximum Ratings” on page 10 updated
• Section 7 “Electrical Characteristics” number 1.7 on page 11 updated
• Features on page 1 updated
• Table 2-1 “Pin Description SO28” on page 4 updated
• Table 2-2 “Pin Description QFN24” on pages 5 to 6 updated
4952E-AUTO-10/08
• Section 4 “Absolute Maximum Ratings” on page 10 updated
• Section 6 “Operating Range” on page 10 updated
• Section 7 “Electrical Characteristics” on pages 11 to 13 updated
• Section 8 “Serial Interface: Timing” on page 14 updated
• Section 9 “Noise and Surge Immunity” on page 16 updated
4952D-AUTO-10/07
• Section 11 “Ordering Information” on page 18 updated
4952C-AUTO-09/07
• Section 7 “Electrical Characteristics” numbers 5.15 and 5.16 on page 12 updated
• Section 9 “Noise and Surge Immunity” on page 16 updated
4952B-AUTO-07/07
• Put datasheet in a new template
• Section 7 “Electrical Characteristics” numbers 1.5, 3.1, 5.15 and 8.2 on pages 11 to 13
updated
20 ATA6836C [DATASHEET]
4952N–AUTO–05/14