T0790-6CP Datasheet, PDF (2/14 Pages) ATMEL Corporation – 700 MHz to 2700 MHz Operating Frequency

Pin Configuration
Figure 2. Pinning SSOP16
BBQ+ 1
VCC 2
GND 3
LO+ 4
LO- 5
GND 6
/SD 7
BBI+ 8
16 BBQ-
15 VCC
14 GND
13 RF+
12 RF-
11 GND
10 VCC
9 BBI-
Pin Description
Pin
Symbol
1
BBQ+
2
VCC
3
GND
4
LO_IN+
5
LO_IN-
6
GND
7
/SD
8
BBI+
9
BBI-
10
VCC
11
GND
12
RF_IN-
13
RF_IN+
14
GND
15
VCC
16
BBQ-
–
Paddle
Function
Baseband Q-axis positive input
Supply voltage
Ground
Positive local oscillator input, nominal DC voltage is 2.0 V internally biased; input should be AC-coupled
Negartive local oscillator input, nominal DC voltage is 2.0 V internally biased; input should be AC-coupled
Ground
Shutdown control
Baseband I-axis positive input
Baseband I-axis negative input
Supply voltage
Ground
Negative RF output; nominal DC voltage is 2.4 Vinternally biased; input should be AC-coupled
Positive RF output; nominal DC voltage is 2.4 V internally biased; input should be AC-coupled
Ground
Supply voltage
Baseband Q-axis negative input
Device ground and heat sink, requires good thermal path; RF reference plane
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Parameters
Symbols
Value
Unit
Supply voltage, no RF
applied
V_CC
5.5
V
LO input signals
LO_IN-, LO_IN+
+10.0
dBm
Input voltage
BBI+, BBI-, BBQ+, BBQ-
3
V
Operating case
temperature
T_C
-40 to +85
°C
Storage temperature
T_STG
-55 to +150
°C
2 T0790 [Preliminary]
4555B–SIGE–10/03