ATR0622P1 Datasheet, PDF (2/11 Pages) ATMEL Corporation – GPS Baseband Processor

1. Description
The GPS baseband processor ATR0622P1 includes a 16-channel GPS correlator and is based
on the ARM7TDMI processor core.
This processor has a high-performance 32-bit RISC architecture and very low power consump-
tion. In addition, a large number of internally banked registers result in very fast exception
handling, making the device ideal for real-time control applications. The ATR0622P1 has two
USART and an USB device port. This port is compliant with the Universal Serial Bus (USB) V2.0
full-speed device specification.
The ATR0622P1 includes full GPS firmware, licensed from u-blox AG, which performs the basic
GPS operation, including tracking, acquisition, navigation and position data output. For normal
PVT (Position/Velocity/Time) applications, there is no need for off-chip Flash memory or ROM.
The firmware supports e.g. the NMEA^® protocol (2.1 and 2.3), a binary protocol for PVT data,
configuration and debugging, the RTCM protocol for DGPS, SBAS (WAAS, EGNOS and MSAS)
and A-GPS (aiding) it is also possible to store the configuration settings in an optional external
EEPROM.
The ATR0622P1 is manufactured using Atmel^®’s high-density CMOS technology. By combining
the ARM7TDMI microcontroller core with on-chip SRAM, 16-channel GPS correlator, and a wide
range of peripheral functions on a monolithic chip, the ATR0622P1 provides a highly flexible and
cost-effective solution for GPS applications.
2 ATR0622P1
4973AS–GPS–12/07