AT16245F Datasheet, PDF (2/6 Pages) ATMEL Corporation – AT16245 Fast Logic Bi-Directional Transceiver

Function Table
Inputs
xOE
L
L
H
Note: 1. X = Don’t Care
xDIR
L
H
X⁽¹⁾
Outputs
Bus B Data to Bus A
Bus A Data to Bus B
High Z State
Absolute Maximum Ratings*
Operating Temperature ........................ 0°C to +70°C
Storage Temperature ......................-65°C to +150°C
Voltage on any Pin
with Respect to Ground................. -2.0 V to +7.0V⁽¹⁾
NOTICE:Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation
of the device at these or any other conditions beyond those
indicated in the operational sections of this specification is not
implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
Maximum Operating Voltage..............................6.0V
Notes: 1. Minimum voltage is -0.6V dc which may undershoot
to -2.0V for pulses of less than 20 ns. Maximum
output pin voltage is VCC +0.75V dc which may
overshoot to +7.0V for pulses of less than 20 ns.
5.0 Volt DC Characteristics
Applicable over recommended operating range from T_a=0°C to +70°C, V_CC=+5.0V ±5% (unless otherwise noted)
Symbol Parameter
Test Conditions
Min Typ Max Units
∆I_CC
Quiescent Power Supply Current
V_CC=Max, V_IN=3.4V
V_IH
Input High Voltage
V_IL
Input Low Voltage
I_IH
Input High Current (I/O Pins)
V_IN=V_CC
I_IL
Input Low Current (I/O Pins)
V_IN= GND
I_OZ
V_OH(1)
V_OH(2)
Output Leakage Current
Output High Voltage
F Grade only
Output High Voltage
G Grade only
V_CC=4.75 V
I_OH=-10 mA
V_CC=4.75 V
I_OH=-12 mA
V_OL
Output Low Voltage (F Grade)
I_OL=10 mA
V_OL
Output Low Voltage (G Grade)
I_OL =12 mA
Note: 1. F grade: At V_{CC(max), the value of VOH(max)} = 3.75V and at V_CC(min), V_{OH(max )} = 3.25V
2. G grade: At V_{CC(max), the value of VOH(max)} = 3.75V and at V_CC(min), V_{OH(max )} = 3.35V
0.8 1.2 mA
2.0
V
0.8 V
±15 µA
±15 µA
±10 µA
2.7
V
2.7
V
0.55 V
0.55 V
5-10
AT16245