AT90USB646 Datasheet, PDF (141/434 Pages) ATMEL Corporation – Microcontroller with 64/128K Bytes of ISP Flash and USB Controller

AT90USB64/128
.
Table 14-1. Compare Output Mode, non-PWM
COMnA1/COMnB1/
COMnC1
COMnA0/COMnB0/
COMnC0
Description
0
0
Normal port operation, OCnA/OCnB/OCnC
disconnected.
0
1
Toggle OCnA/OCnB/OCnC on compare
match.
1
0
Clear OCnA/OCnB/OCnC on compare
match (set output to low level).
1
1
Set OCnA/OCnB/OCnC on compare match
(set output to high level).
Table 14-2 shows the COMnx1:0 bit functionality when the WGMn3:0 bits are set to the fast
PWM mode.
Table 14-2. Compare Output Mode, Fast PWM
COMnA1/COMnB1/
COMnC0
COMnA0/COMnB0/
COMnC0
Description
0
0
Normal port operation, OCnA/OCnB/OCnC
disconnected.
WGM13:0 = 14 or 15: Toggle OC1A on
Compare Match, OC1B and OC1C
0
1
disconnected (normal port operation). For all
other WGM1 settings, normal port operation,
OC1A/OC1B/OC1C disconnected.
1
0
Clear OCnA/OCnB/OCnC on compare
match, set OCnA/OCnB/OCnC at TOP
1
1
Set OCnA/OCnB/OCnC on compare match,
clear OCnA/OCnB/OCnC at TOP
Note:
A special case occurs when OCRnA/OCRnB/OCRnC equals TOP and
COMnA1/COMnB1/COMnC1 is set. In this case the compare match is ignored, but the set or clear
is done at TOP. See “Fast PWM Mode” on page 107. for more details.
Table 14-3 shows the COMnx1:0 bit functionality when the WGMn3:0 bits are set to the phase
correct and frequency correct PWM mode.
7593A–AVR–02/06
141