English
Language : 

U4090B-P Datasheet, PDF (14/35 Pages) ATMEL Corporation – Monolithic Integrated Feature Phone Circuit EMI Improved
4. Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Parameters
Symbol
Value
Unit
Line current
IL
140
mA
DC line voltage
VL
12
V
Maximum input current, pin 17
IRING
15
mA
Junction temperature
Tj
125
°C
Ambient temperature
Tamb
–25 to +75
°C
Storage temperature
Tstg
–55 to +150
°C
Total power dissipation, Tamb = 60°C
Ptot
0.9
W
5. Thermal Resistance
Parameters
Junction ambient SSO44
Symbol
RthJA
Value
70
Unit
K/W
6. Electrical Characteristics
f = 1 kHz, 0 dBm = 775 mVrms, IM = 0.3 mA, IMP = 2 mA, RDC = 130 kΩ, Tamb = 25°C, RGSA = 560 kΩ,
Zear = 68 nF + 100Ω, ZM = 68 nF, pin 31 open, VIMPSEL = GND, VMUTX = GND, VMUTR = GND, unless otherwise specified.
Parameters
Test Conditions
Symbol
Min.
Typ.
Max.
DC Characteristics
DC voltage drop over circuit
IL = 2 mA
IL = 14 mA
IL = 60 mA
IL = 100 mA
2.4
VL
4.6
5.0
5.4
7.5
8.8
9.4
10.0
Transmission Amplifier, IL = 14 mA, VMIC = 2 mV, RGT = 27 kΩ, Unless Otherwise Specified
Range of transmit gain
GT
40
45
50
Transmitting amplification
RGT = 12 kΩ
RGT = 27 kΩ
GT
47
48
49
39.8
41.8
Frequency response
IL ≥ 14 mA
f = 300 to 3400 Hz
∆GT
±0.5
Gain change with current
Gain deviation
CMRR of microphone amplifier
Pin 31 open
IL = 14 to 100 mA
Tamb = –10 to +60° C
∆GT
±0.5
∆GT
±0.5
CMRR
60
80
Input resistance of MIC amplifier
Distortion at line
Maximum output voltage
RGT = 12 kΩ
RGT = 27 kΩ
IL > 14 mA
VL = 700 mVrms
IL > 19 mA, d < 5%
VMIC = 25 mV
CTXA = 1 µF
IMPSEL = open
RGT = 12 kΩ
Ri
50
45
75
110
dt
2
VLmax
1.8
3
4.2
VMICOmax
–5.2
Unit
V
dB
dB
dB
dB
dB
dB
kΩ
%
dBm
dBm
14 U4090B-P
4741C–CORD–11/05