TINY4 Datasheet, PDF (11/28 Pages) ATMEL Corporation – Single cycle instructions

Atmel ARM Cortex-M4 Summary
SAM4 & SAM G
SAM 4/G Family
Features
Cortex M4/M4F
Up to 2MB Dual Bank
Flash
High I/O Pin
DMA
Communication (USB,
CAN, Ethernet)
CMOS Interface
Safety and Security
I²S
SAM4N
SAM4S
SAM4E
SAM4L
SAM G
100 MHz
120 MHz
512KB-1MB
Single Bank
-
128KB-2MB
Single/Dual Bank
Cache
48, 64 and 100 pins
120 MHz
512KB-1MB
Single Bank
Cache
100, 144 pins
DMA
FS USB Device
-
-
FS USB Device
2x CAN
1x Ethernet
CMOS Interface
CRC
CRC
-
AES 256
-
-
I²S
48 MHz
128-512KB
Single Bank
-
48, 64 and 100
pins
DMA
FS USB H&D
-
-
CRC
AES 256
RNG
I²S
120 MHz
256-512KB
Single Bank
Cache
49 and 64 pins
DMA
CRC
-
-
I²S
Series Descriptions
• SAM4N – Ideal for a wide range of applications in
industrial automation, consumer and appliance, and
energy metering markets. Pin compatible with SAM3S,
SAM3N and SAM7S,
• SAM4S – Features a multi-layer bus matrix, multi-
channel direct memory access (DMA) and distributed
memory to support high data rate communication.
• SAM4E – Offers a rich set of connectivity peripherals
including 10/100Mbps Ethernet MAC supporting
IEEE1588 and dual CAN as well as single-precision FPU.
• SAM4L – Ideal for power sensitive designs delivering
down to 90uA/MHz in active mode as well as sleep
mode with full RAM retention of 1.5uA and wake-up
time of 1.5us.
• SAM G – Optimized for ultra-low power and high
performance. Small form factor bundled with FPU,
DMA and good SRAM to flash ratio in a very tiny
3x3mm package
Product Selection Guide
11