AT49BV322A-70TU Datasheet, PDF (10/32 Pages) ATMEL Corporation – 32-megabit (2M x 16/4M x 8) 3-volt Only Flash Memory

Figure 4-1. Data Polling Algorithm
(Configuration Register = 00)
START
Figure 4-2. Data Polling Algorithm
(Configuration Register = 01)
START
Read I/O7 - I/O0
Addr = VA
I/O7 = Data?
YES
NO
NO
I/O3, I/O5 = 1?
YES
Read I/O7 - I/O0
Addr = VA
Read I/O7 - I/O0
Addr = VA
I/O7 = Data?
YES
NO
NO
I/O3, I/O5 = 1?
YES
Read I/O7 - I/O0
Addr = VA
I/O7 = Data?
YES
I/O7 = Data?
YES
NO
Program/Erase
Operation Not
Successful, Write
Product ID
Exit Command
Program/Erase
Operation
Successful,
Device in
Read Mode
NO
Program/Erase
Operation Not
Successful, Write
Product ID
Exit Command
Program/Erase
Operation
Successful,
Write Product ID
Exit Command
Notes:
1. VA = Valid address for programming. During a sector
erase operation, a valid address is any sector
address within the sector being erased. During chip
erase, a valid address is any non-protected sector
address.
2. I/O7 should be rechecked even if I/O5 = “1” because
I/O7 may change simultaneously with I/O5.
Notes:
1. VA = Valid address for programming. During a sector
erase operation, a valid address is any sector
address within the sector being erased. During chip
erase, a valid address is any non-protected sector
address.
2. I/O7 should be rechecked even if I/O5 = “1” because
I/O7 may change simultaneously with I/O5.
10 AT49BV322A(T)
3308J–FLASH–4/05