English
Language : 

AT27BV1024_07 Datasheet, PDF (10/14 Pages) ATMEL Corporation – 1-Megabit (64K x 16) Unregulated Battery-Voltage High-Speed OTP EPROM
18. Rapid Programming Algorithm
A 100 µs PGM pulse width is used to program. The address is set to the first location. VCC is
raised to 6.5V and VPP is raised to 13.0V. Each address is first programmed with one 100 µs
PGM pulse without verification. Then a verification/reprogramming loop is executed for each
address. In the event a word fails to pass verification, up to 10 successive 100 µs pulses are
applied with a verification after each pulse. If the word fails to verify after 10 pulses have been
applied, the part is considered failed. After the word verifies properly, the next address is
selected until all have been checked. VPP is then lowered to 5.0V and VCC to 5.0V. All words are
read again and compared with the original data to determine if the device passes or fails.
10 AT27BV1024
0631E–EPROM–12/07