TS8388B Datasheet, PDF (1/57 Pages) ATMEL Corporation – ADC 8-bit 1 GSPS

Features
• 8-bit Resolution
• ADC Gain Adjust
• 1.5 GHz Full Power Input Bandwidth (-3 dB)
• 1 GSPS (min) Sampling Rate
• SINAD = 44.3 dB (7.2 Effective Bits), SFDR = 58 dBc,
at F_S = 1 GSPS, F_IN = 20 MHz
• SINAD = 42.9 dB (7.0 Effective Bits), SFDR = 52 dBc,
at F_S = 1 GSPS, F_IN = 500 MHz
• SINAD = 40.3 dB (6.8 Effective Bits), SFDR = 50 dBc,
at F_S = 1 GSPS, F_IN = 1000 MHz (-3 dB FS)
• 2-tone IMD: -52 dBc (489 MHz, 490 MHz) at 1 GSPS
• DNL = 0.3 lsb, INL = 0.7 lsb
• Low Bit Error Rate (10^-13) at 1 GSPS
• Very Low Input Capacitance: 3 pF
• 500 mVpp Differential or Single-ended Analog Inputs
• Differential or Single-ended 50Ω ECL Compatible Clock Inputs
• ECL or LVDS/HSTL Output Compatibility
• Data Ready Output with Asynchronous Reset
• Gray or Binary Selectable Output Data; NRZ Output Mode
• Power Consumption: 3.4W at Tj = 70°C Typical
• Radiation Tolerance Oriented Design (150 Krad (Si) measured)
• Two Package Versions
• Evaluation board: TSEV8388B
• Demultiplexer TS81102G0: Companion Device Available
ADC 8-bit
1 GSPS
TS8388B
Applications
• Digital Sampling Oscilloscopes
• Satellite Receiver
• Electronic Countermeasures/Electronic Warfare
• Direct RF Down-conversion
Description
The TS8388B is a monolithic 8-bit analog-to-digital converter, designed for digitizing
wide bandwidth analog signals at very high sampling rates of up to 1 GSPS.
The TS8388B uses an innovative architecture,
including an on-chip Sample and Hold (S/H),
and is fabricated with an advanced
high speed bipolar process.
The on-chip S/H has a 1.5 GHz full power
input bandwidth, providing excellent dynamic
performance in undersampling applications
(High IF digitizing).
Rev. 2144C–BDC–04/03
1