English
Language : 

TS80C54X2 Datasheet, PDF (1/58 Pages) ATMEL Corporation – 8-bit CMOS Microcontroller 16/32 Kbytes ROM/OTP
TS80C54X2/C58X2
TS87C54X2/C58X2
8-bit CMOS Microcontroller 16/32 Kbytes ROM/OTP
1. Description
TS80C54/58X2 is high performance CMOS ROM, OTP
and EPROM versions of the 80C51 CMOS single chip
8-bit microcontroller.
The TS80C54/58X2 retains all features of the Atmel
Wireless & Microcontrollers 80C51 with extended
ROM/EPROM capacity (16/32 Kbytes), 256 bytes of
internal RAM, a 6-source , 4-level interrupt system, an
on-chip oscilator and three timer/counters.
In addition, the TS80C54/58X2 has a Hardware
Watchdog Timer, a more versatile serial channel that
facilitates multiprocessor communication (EUART) and
a X2 speed improvement mechanism.
The fully static design of the TS80C54/58X2 allows to
reduce system power consumption by bringing the clock
frequency down to any value, even DC, without loss of
data.
The TS80C54/58X2 has 2 software-selectable modes of
reduced activity for further reduction in power
consumption. In the idle mode the CPU is frozen while
the timers, the serial port and the interrupt system are still
operating. In the power-down mode the RAM is saved
and all other functions are inoperative.
2. Features
q 80C52 Compatible
• 8051 pin and instruction compatible
• Four 8-bit I/O ports
• Three 16-bit timer/counters
• 256 bytes scratchpad RAM
q High-Speed Architecture
• 40 MHz @ 5V, 30MHz @ 3V
• X2 Speed Improvement capability (6 clocks/
machine cycle)
30 MHz @ 5V, 20 MHz @ 3V (Equivalent to
60 MHz @ 5V, 40 MHz @ 3V)
q Dual Data Pointer
q On-chip ROM/EPROM (16K-bytes, 32K-bytes)
q Programmable Clock Out and Up/Down Timer/
Counter 2
q Hardware Watchdog Timer (One-time enabled with
Reset-Out)
q Asynchronous port reset
q Interrupt Structure with
• 6 Interrupt sources
• 4 level priority interrupt system
q Full duplex Enhanced UART
• Framing error detection
• Automatic address recognition
q Low EMI (inhibit ALE)
q Power Control modes
• Idle mode
• Power-down mode
• Power-off Flag
q Once mode (On-chip Emulation)
q Power supply: 4.5-5.5V, 2.7-5.5V
q Temperature ranges: Commercial (0 to 70oC) and
Industrial (-40 to 85oC)
q Packages: PDIL40, PLCC44, VQFP44 1.4, PQFP44
F1, CQPJ44 (window), CDIL40 (window)
Rev. C - 15 January, 2001
1