TS68EN360 Datasheet, PDF (1/82 Pages) ATMEL Corporation – 32-bit Quad Integrated Communication Controller

Features
• CPU32+ Processor (4.5 MIPS at 25 MHz)
– 32-bit Version of the CPU32 Core (Fully Compatible with the CPU32)
– Background Debug Mode
– Byte-misaligned Addressing
• Up to 32-bit Data Bus (Dynamic Bus Sizing for 8 and 16 Bits)
• Up to 32 Address Lines (At Least 28 Always Available)
• Complete Static Design (0 - 25 MHz Operation)
• Slave Mode to Disable CPU32+ (Allows Use with External Processors)
– Multiple QUICCs Can Share One System Bus (One Master)
– TS68040 Companion Mode Allows QUICC to be a TS68040 Companion Chip and
Intelligent Peripheral (22 MIPS at 25 MHz)
– Peripheral Device of TSPC603e (see DC415/D note)
• Four General-purpose Timers
– Superset of MC68302 Timers
– Four 16-bit Timers or Two 32-bit Timers
– Gate Mode Can Enable/Disable Counting
• Two Independent DMAs (IDMAs)
• System Integration Module (SIM60)
• Communications Processor Module (CPM)
• Four Baud Rate Generators
• Four SCCs (Ethernet/IEEE 802.3 Optional on SCC1-Full 10 Mbps Support)
• Two SMC
• V_CC = +5V ± 5%
• f_max = 25 MHz and 33 MHz
• Military Temperature Range: -55°C < T_C < +125°C
• P_D = 1.4 W at 25 MHz; 5.25V
2 W at 33 MHz; 5.25V
32-bit Quad
Integrated
Communication
Controller
TS68EN360
Description
The TS68EN360 QUad Integrated Communication Controller (QUICC^™) is a versatile
one-chip integrated microprocessor and peripheral combination that can be used in a
variety of controller applications. It particularly excels in communications activities.
The QUICC (pronounced “quick”) can be described as a next-generation TS68302
with higher performance in all areas of device operation, increased flexibility, major
extensions in capability, and higher integration. The term “quad” comes from the fact
that there are four serial communications controllers (SCCs) on the device; however,
there are actually seven serial channels: four SCCs, two serial management control-
lers (SMCs), and one serial peripheral interface (SPI).
Screening/Quality
This product is manufactured in full compliance with:
• MIL-STD-883 (class B)
• QML (class Q)
• or according to Atmel standards
Rev. 2113A–HIREL–03/02
1