REB233SMAD Datasheet, PDF (1/4 Pages) ATMEL Corporation – 8-bit Atmel Microcontrollers

Atmel AVR2160: REB233SMAD Evaluation Kit -
Quick Start Guide
Features
This application note briefly describes how to set up and run the pre-flashed
applications supplied with the Atmel^® REB233SMAD Evaluation Kit.
The Atmel Controller Base Board (CBB) is intended to serve as microcontroller
platform for the Atmel Radio Extender Board (REB) family. The REB connected to a
CBB forms a full functional, battery powered and portable wireless node. The
REB233SMAD Evaluation Kit is targeted for evaluating the new features (for
example improved low power capabilities) of the Atmel AT86RF233 radio
transceiver.
8-bit Atmel
Microcontrollers
Application Note
1 Kit contents
2 × Atmel CBB
4 × SMA antenna M35-S
1 × Quick start guide
2 × Atmel REB233SMAD
2 × USB adapter
4 × AAA battery
From left to right: 2 × CBB, 2 × REB233SMAD, 4 × SMA antenna, and 2 × USB adapter.
2 Board assembling
1. Check/set power switch off at the two CBBs.
2. Insert two batteries in each CBB.
3. Mount the antennas to both REBs.
4. Connect each REB to a CCB to create two REB-CBB assemblies.
Expand1
Connector
Rev. 42000B-AVR-04/12