ATZB-RF-212B-0-CN_14 Datasheet, PDF (1/23 Pages) ATMEL Corporation – ZIGBIT 900MHZ WIRELESS MODULES

Note:
ZIGBIT 900MHZ WIRELESS MODULES
ATZB-RF-212B-0-CN
DATASHEET
Features
• Compact size (30.0 x 20.0mm)
• MCU less transceiver module with SPI interface
• High RX sensitivity (-103dBm)
• Outperforming link budget (up to +112dB)
• Up to +9.0dBm output power
• Very low power consumption:
• 8.7mA in RX mode ⁽¹⁾
• 27mA in TX mode ⁽¹⁾
• 0.7µA in sleep mode ⁽²⁾
• Internal clock output
• Preassigned Atmel^® MAC address that can be used on end product
• Capability to use MAC address into the internal EEPROM
• IEEE^® 802.15.4 compliant transceiver
• 900MHz ISM band
• Serial bootloader
• Rapid design-in with built-in chip antenna
• RF test point using MS-147 RF connector
• Small physical footprint and low profile for optimum fit in very small application
boards
• Mesh networking capability
• Easy-to-use low cost development kit
• Single source of support for HW and SW
• Worldwide license-free operation
1. RX RPC enabled (for RX current), PHY_TX_PWR=0x0 (for TX current).
2. Controller Sleep Mode: SLEEP_MODE_PWR_DOWN.
4 22 69 B−W I REL ESS−07 /2 01 4