ATZB-A24-UFLB_14 Datasheet, PDF (1/22 Pages) ATMEL Corporation – ZIGBIT 2.4GHZ AMPLIFIED WIRELESS

ZIGBIT 2.4GHZ AMPLIFIED WIRELESS
MODULES REVB
ATZB-A24-UFLB/U0B
DATASHEET
Features
• Ultra compact size (38.0 × 13.5 × 2.0mm)
• High RX sensitivity (-107dBm)
• Outperforming link budget (up to 127dB)
• Up to +20dBm output power
• Very low power consumption:
• 30µA in sleep mode ⁽²⁾
• 39.5mA in RX mode ⁽¹⁾
• 183.5mA in TX mode ⁽¹⁾
• Ample memory resources (128KB of flash memory, 8KB RAM, 4KB EEPROM)
• Wide range of interfaces (both analog and digital)
• Nine spare GPIO, two spare IRQ lines
• Four ADC lines + one line for supply voltage control (up to nine lines with JTAG
disabled)
• UART with CTS/RTS control
• USART
• I²C
• 1-wire
• Up to 30 lines configurable as GPIO
• IEEE^® 802.15.4 compliant transceiver
• 2.4GHz ISM band
• Extended range through additional PA and LNA
• Ultra-low power consumption combined with unprecedented range
• Rapid design-in with built-in U.FL connector (ATZB-A24-UFLB)
• Flexibility in using a different external antenna for every application
• Small physical footprint and low profile for optimum fit in even the smallest of
devices
• Mesh networking capability
• Single source of support for HW and SW
• Worldwide license-free operation
Notes: 1. Measured with LNA gain enabled / measured with TX output power of +20dBm; measured with MCU clock of
8MHz.
2. Refer the Known Issues section.
42058C−WIRELESS−06/2013