|
ATZB-24-A2_14 Datasheet, PDF (1/25 Pages) ATMEL Corporation – ZIGBIT 2.4GHZ WIRELESS MODULES | |||
|
ZIGBIT 2.4GHZ WIRELESS MODULES
ATZB-24-A2/B0
DATASHEET
Features
⢠Ultra compact size (24 à 13.5 à 2.0mm for the Atmel® ATZB-24-A2 module and
18 Ã 13.5 Ã 2.0mm for the Atmel ATZB-24-B0 module)
⢠Innovative balanced dual chip antenna design with antenna gain of approximately
0dBi (A2 only) (for ATZB-24-A2 version)
⢠High RX sensitivity (-101dBm)
⢠Outperforming link budget (104dB) Atmel
⢠Up to 3dBm output power
⢠Very low power consumption:
⢠<6µA in sleep mode
⢠21.8mA in RX mode
⢠20.8mA in TX mode (0dBm)
⢠Ample memory resources (128KB of flash memory, 8KB RAM, 4KB EEPROM)
⢠Wide range of interfaces (both analog and digital)
⢠Nine spare GPIO, two spare IRQ lines
⢠Four ADC lines + one line for supply voltage control (up to nine lines with JTAG
disabled)
⢠UART with CTS/RTS control
⢠USART
⢠I2C
⢠1-wire
⢠Up to 30 lines configurable as GPIO
⢠Capability to write own MAC address into the EEPROM
⢠Optional antenna reference designs
⢠IEEE® 802.15.4 compliant receiver
⢠2.4GHz ISM band
⢠BitCloud® embedded software, including serial bootloader
⢠Small physical footprint and low profile for optimum fit in even the smallest of
devices
⢠Best-in-class RF link range
⢠Extended battery life
⢠Easy prototyping with 2-layer PCB
⢠Ample memory for user software application
⢠Mesh networking capability
⢠Easy-to-use low cost evaluation kit
⢠Single source of support for HW and SW
⢠Worldwide license-free operation
8226CâAVRâ07/2013
|
▷ |