ATZB-24-A2 Datasheet, PDF (1/25 Pages) ATMEL Corporation – ZIGBIT 2.4GHZ WIRELESS MODULES

ZIGBIT 2.4GHZ WIRELESS MODULES
ATZB-24-A2/B0
DATASHEET
Features
• Ultra compact size (24 × 13.5 × 2.0mm for the Atmel^® ATZB-24-A2 module and
18 × 13.5 × 2.0mm for the Atmel ATZB-24-B0 module)
• Innovative balanced dual chip antenna design with antenna gain of approximately
0dBi (A2 only) (for ATZB-24-A2 version)
• High RX sensitivity (-101dBm)
• Outperforming link budget (104dB) Atmel
• Up to 3dBm output power
• Very low power consumption:
• <6µA in sleep mode
• 21.8mA in RX mode
• 20.8mA in TX mode (0dBm)
• Ample memory resources (128KB of flash memory, 8KB RAM, 4KB EEPROM)
• Wide range of interfaces (both analog and digital)
• Nine spare GPIO, two spare IRQ lines
• Four ADC lines + one line for supply voltage control (up to nine lines with JTAG
disabled)
• UART with CTS/RTS control
• USART
• I²C
• 1-wire
• Up to 30 lines configurable as GPIO
• Capability to write own MAC address into the EEPROM
• Optional antenna reference designs
• IEEE^® 802.15.4 compliant receiver
• 2.4GHz ISM band
• BitCloud^® embedded software, including serial bootloader
• Small physical footprint and low profile for optimum fit in even the smallest of
devices
• Best-in-class RF link range
• Extended battery life
• Easy prototyping with 2-layer PCB
• Ample memory for user software application
• Mesh networking capability
• Easy-to-use low cost evaluation kit
• Single source of support for HW and SW
• Worldwide license-free operation
8226C−AVR−07/2013