ATXMEGA64D3_14 Datasheet, PDF (1/86 Pages) ATMEL Corporation – 8/16-bit Atmel AVR XMEGA D3 Microcontroller

ATxmega64D3 Automotive
8/16-bit Atmel AVR XMEGA D3 Microcontroller
DATASHEET
Features
● High-performance, low-power Atmel^® AVR^® XMEGA^® 8/16-bit Microcontroller
● Nonvolatile program and data memories
● 64Kbytes of in-system self-programmable flash
● 4Kbytes boot section
● 2Kbytes EEPROM
● 4Kbytes internal SRAM
● Peripheral features
● Four-channel event system
● Five 16-bit timer/counters
● Four timer/counters with four output compare or input capture channels
● One timer/counter with two output compare or input capture channels
● High resolution extension on two timer/counters
● Advanced waveform extension (AWeX) on one timer/counter
● Three USARTs with IrDA support for one USART
● Two two-wire interfaces with dual address match (I²C and SMBus compatible)
● Two serial peripheral interfaces (SPIs)
● CRC-16 (CRC-CCITT) and CRC-32 (IEEE^®802.3) generator
● 16-bit real time counter (RTC) with separate oscillator
● One sixteen-channel, 12-bit, 300ksps Analog to Digital Converter
● Two Analog Comparators with window compare function, and current sources
● External interrupts on all general purpose I/O pins
● Programmable watchdog timer with separate on-chip ultra low power oscillator
● Atmel QTouch^® library support
● Capacitive touch buttons, sliders and wheels
● Special microcontroller features
● Power-on reset and programmable brown-out detection
● Internal and external clock options with PLL and prescaler
● Programmable multilevel interrupt controller
● Five sleep modes
● Programming and debug interface
● PDI (program and debug interface)
● I/O and packages
● 50 programmable I/O pins
● 64-lead TQFP
9322A-AVR-03/14